A few pics of these two mods as brain rinse had shown some interest.
Let me know if any clarification is needed...
Bow cushion before- lack of drink holders were becoming a problem!!!
Results 1 to 10 of 31
06-20-2012, 12:21 AM #1
Bow cushion and hinged wind block mods'08 Mobius LSV, Mods- 1100 lb Rear Sacs, IBS Sac, Center 400 Sac, Dedicated thru-hull intakes and pumps per sac, SeaDek One Piece Mica over Black Roo, EZ Net Cargo Nets, Swivel Drivers Seat, Hot Water Shower, Hinged Wind Block, Bow Cushion Adapter Plate for Drink Holders Access, etc, etc.
06-20-2012, 12:24 AM #2'08 Mobius LSV, Mods- 1100 lb Rear Sacs, IBS Sac, Center 400 Sac, Dedicated thru-hull intakes and pumps per sac, SeaDek One Piece Mica over Black Roo, EZ Net Cargo Nets, Swivel Drivers Seat, Hot Water Shower, Hinged Wind Block, Bow Cushion Adapter Plate for Drink Holders Access, etc, etc.
06-20-2012, 12:31 AM #3
i like the wind block
Rockford fasgate cabins
Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
Polk 10in sub (2)
Polk P330 amp (subs)
06-20-2012, 12:47 AM #4
Very nice work! I am going to build a bow filler cushion one of these days. After seeing your pics I might keep it short and keep the cup holders. Thanks for the pics!Dan
08 LSV Mods
06-20-2012, 01:07 AM #5
I like it!!!2010 Moomba XLV
Gravity 3, wake plate
I have a love for ballast and large wakes.
1100 v-drive lockers
1180 under the playpen
+ lead and a collection of other ballast bags
06-20-2012, 01:01 PM #6Senior Member
- Join Date
- Aug 2011
Can you post up more info on the wind block?2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV
06-20-2012, 03:45 PM #7
Sure. I'll take some pics this weekend while we are on the water.
06-20-2012, 09:27 PM #8
I just ordered a bow filler cushion and it likes I slide back. I always thought they had some kind of circular piece that fit inside those cup holders to keep it in place but I guess not? Is mine defective or are they all flat on the bottom???!
Sent from my iPhone newtys droid killer using TapatalkDavid
2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Harpoon, Exile SM600.1 , Exile Xi800.4.
06-20-2012, 10:46 PM #9SOLD! 2011 Mobius LSV 325HP EFI
Digital Cruise Pro, Wakeplate, Kenwood KM550U and KCA-RC107MR x2, Kicker ZXM700.5, Kicker 6.5 Cabins, 10'' Kicker CompVT sub, Wetsounds SYN 4, Wetsounds REV10s, Wetsounds WS420Q, Gravity VI Surf Ballast, Acme 537
Board: '12 LF Harley (Monster) 139
Her Board: '11 Ronix Krush 128
Kids Board: '13 Ronix Vision 120
Skate: LF Faction 44
Surf: LF Custom Quad & XXX
2011 Toyota Tundra CrewMax TRD Magnetic Grey
3/1 Truxx Lift, and some other stuff...
06-20-2012, 10:58 PM #10
The one on my Mojo is flat on the bottom, but doesn't slide back. It wedges between the bow cushions real tight. Maybe it will loosen up over time.Drew
New ride: 2012 Mojo
Old ride: 2008 OBV