Page 1 of 4 123 ... LastLast
Results 1 to 10 of 31
  1. #1
    Join Date
    Jun 2009
    Location
    South West Colorado
    Posts
    344

    Default Bow cushion and hinged wind block mods

    A few pics of these two mods as brain rinse had shown some interest.

    Let me know if any clarification is needed...

    Bow cushion before- lack of drink holders were becoming a problem!!!
    ImageUploadedByTapatalk1340162276.895537.jpg

    End result
    ImageUploadedByTapatalk1340162341.092203.jpg

    ImageUploadedByTapatalk1340162364.695740.jpg

    The adapter
    ImageUploadedByTapatalk1340162390.043894.jpg

    Added Supports
    ImageUploadedByTapatalk1340162437.828973.jpg
    '08 Mobius LSV, Mods- 1100 lb Rear Sacs, IBS Sac, Center 400 Sac, Dedicated thru-hull intakes and pumps per sac, SeaDek One Piece Mica over Black Roo, EZ Net Cargo Nets, Swivel Drivers Seat, Hot Water Shower, Hinged Wind Block, Bow Cushion Adapter Plate for Drink Holders Access, etc, etc.

  2. #2
    Join Date
    Jun 2009
    Location
    South West Colorado
    Posts
    344

    Default

    '08 Mobius LSV, Mods- 1100 lb Rear Sacs, IBS Sac, Center 400 Sac, Dedicated thru-hull intakes and pumps per sac, SeaDek One Piece Mica over Black Roo, EZ Net Cargo Nets, Swivel Drivers Seat, Hot Water Shower, Hinged Wind Block, Bow Cushion Adapter Plate for Drink Holders Access, etc, etc.

  3. #3
    Join Date
    Mar 2010
    Location
    Irondequoit Bay, NY
    Posts
    1,294

    Default

    i like the wind block
    2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
    Rockford fasgate cabins
    Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
    Exile XM7's
    Exile Harpoon
    Exile ZLD
    Polk 10in sub (2)
    Polk P330 amp (subs)

  4. #4
    Join Date
    Jul 2008
    Location
    Des Moines, IA
    Posts
    2,543

    Default

    Very nice work! I am going to build a bow filler cushion one of these days. After seeing your pics I might keep it short and keep the cup holders. Thanks for the pics!

  5. #5
    Join Date
    Jul 2011
    Location
    Murrieta, CA
    Posts
    912

    Default

    I like it!!!
    2010 Moomba XLV
    340hp cat
    Gravity 3, wake plate
    Rad-a-cage

    I have a love for ballast and large wakes.
    1100 v-drive lockers
    1180 under the playpen
    + lead and a collection of other ballast bags

  6. #6
    Join Date
    Aug 2011
    Posts
    950

    Default

    Can you post up more info on the wind block?
    2002 Moomba Mobius LSV - Sold
    2006 Moomba Mobius LSV

  7. #7
    Join Date
    Jun 2009
    Location
    South West Colorado
    Posts
    344

    Default

    Sure. I'll take some pics this weekend while we are on the water.
    '08 Mobius LSV, Mods- 1100 lb Rear Sacs, IBS Sac, Center 400 Sac, Dedicated thru-hull intakes and pumps per sac, SeaDek One Piece Mica over Black Roo, EZ Net Cargo Nets, Swivel Drivers Seat, Hot Water Shower, Hinged Wind Block, Bow Cushion Adapter Plate for Drink Holders Access, etc, etc.

  8. #8
    Join Date
    Nov 2010
    Location
    Katy, TX
    Posts
    4,096

    Default

    I just ordered a bow filler cushion and it likes I slide back. I always thought they had some kind of circular piece that fit inside those cup holders to keep it in place but I guess not? Is mine defective or are they all flat on the bottom???!


    Sent from my iPhone newtys droid killer using Tapatalk
    David

    2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Harpoon, Exile SM600.1 , Exile Xi800.4.

  9. #9
    Join Date
    Feb 2010
    Location
    Canton, Ga / Lake Lanier
    Posts
    1,589

    Default

    Quote Originally Posted by rdlangston13 View Post
    I just ordered a bow filler cushion and it likes I slide back. I always thought they had some kind of circular piece that fit inside those cup holders to keep it in place but I guess not? Is mine defective or are they all flat on the bottom???!


    Sent from my iPhone newtys droid killer using Tapatalk
    How much was that cushion? I've been thinking about ordering one too.


    Sent from my iPhone using Tapatalk
    SOLD! 2011 Mobius LSV 325HP EFI
    Digital Cruise Pro, Wakeplate, Kenwood KM550U and KCA-RC107MR x2, Kicker ZXM700.5, Kicker 6.5 Cabins, 10'' Kicker CompVT sub, Wetsounds SYN 4, Wetsounds REV10s, Wetsounds WS420Q, Gravity VI Surf Ballast, Acme 537

    Board: '12 LF Harley (Monster) 139
    Her Board: '11 Ronix Krush 128
    Kids Board: '13 Ronix Vision 120
    Skate: LF Faction 44
    Surf: LF Custom Quad & XXX


    Tow Rig:
    2011 Toyota Tundra CrewMax TRD Magnetic Grey
    3/1 Truxx Lift, and some other stuff...

  10. #10
    Join Date
    Jul 2008
    Location
    Snellville, GA & Lake Sinclair
    Posts
    6,913

    Default

    The one on my Mojo is flat on the bottom, but doesn't slide back. It wedges between the bow cushions real tight. Maybe it will loosen up over time.
    Drew
    New ride: 2012 Mojo
    Old ride: 2008 OBV

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •