Page 1 of 2 12 LastLast
Results 1 to 10 of 25

Hybrid View

  1. #1
    Join Date
    Aug 2006
    Location
    Baton Rouge, LA / Big Bay Lake, MS
    Posts
    2,245

    Default Fat sac glue question?

    What do you use to glue them in??
    I'm sure it's been addressed 29 times already.
    Thanks.
    Time for a surf sac
    Brad

    Mississippi/Louisiana
    2011 Launch 21V
    2006 Moomba Mobius LSV sold
    2004 Outback sold

  2. #2
    Join Date
    Jul 2008
    Location
    Snellville, GA & Lake Sinclair
    Posts
    6,965

    Default

    Do you mean the fittings? I didn't glue mine in at all, just tighten them up. Knock on wood, no leaks.
    Drew
    New ride: 2012 Mojo
    Old ride: 2008 OBV

  3. #3
    Join Date
    Aug 2006
    Location
    Baton Rouge, LA / Big Bay Lake, MS
    Posts
    2,245

    Default

    Yes, fittings.. Thks for reading my mind
    Brad

    Mississippi/Louisiana
    2011 Launch 21V
    2006 Moomba Mobius LSV sold
    2004 Outback sold

  4. #4
    Join Date
    Jan 2008
    Location
    Tallahassee, FL
    Posts
    11,208

    Default

    I've used just some pipe tape. Others suggest the pipe dope stuff or the pvc cement. If you ever want to get them out you might think about how permanent you want it. It's low pressure so I don't see why you need anything but the pipe tape works great.
    My Mom said I'm not allowed to get wet!
    2008 LSV
    2000 Outback LS (sold)
    Exile Tunes
    PWI
    LLTR!!!!!!!!



  5. #5
    Join Date
    Jul 2008
    Location
    Des Moines, IA
    Posts
    2,577

    Default

    Wakemakers recommended all purpose pvc cement. I have a port that is leaking enough that thread tape won't fix it so I'm planning to give this a try.

  6. #6
    Join Date
    Jan 2008
    Location
    Keuka Lake, NY
    Posts
    5,760

    Default

    Just hand tighten, leave glue for last resort, Teflon tape is 2nd step.
    A Day at the Lake...Priceless
    A Day in Powder...Endless


    Joe V
    2012 Möbius XLV~ Loaded & Exiled
    2007 Outback V ~ sold

  7. #7
    Join Date
    Aug 2006
    Location
    Baton Rouge, LA / Big Bay Lake, MS
    Posts
    2,245

    Default

    Went with tape. Wasn't up for the glue. We'll see how it holds
    Brad

    Mississippi/Louisiana
    2011 Launch 21V
    2006 Moomba Mobius LSV sold
    2004 Outback sold

  8. #8
    Join Date
    Aug 2010
    Location
    Acworth, GA
    Posts
    1,219

    Default

    I think taco beat would weld them in... but that's just a guess
    Kraig - 2010 Outback V

  9. #9
    Join Date
    Jul 2011
    Location
    Murrieta, CA
    Posts
    948

    Default

    I tried both methods. Only the PVC glue held for me. The downside is that the fittings may be permanent. But - no more fittings popping out and sending 400 lbs of water onto the carpet and into the bilge.
    2010 Moomba XLV
    340hp cat
    Gravity 3, wake plate
    Rad-a-cage

    I have a love for ballast and large wakes.
    1100 v-drive lockers
    1180 under the playpen
    + lead and a collection of other ballast bags

  10. #10
    Join Date
    May 2010
    Location
    Muskoka, Ontario
    Posts
    389

    Default

    I dont see how the fitting could pop out. When I installed mine on the 750's it was a real stretch to get them in all the way.

    On another note I want to take them off on the OEM 400 bags. Does heat help? They are on there good, not sure if Moomba puts glue on them from the factory.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •