2011 LSV V2 Tower Swivel Racks

[Vukaluk]

Hi Guys,

So we recently bought a new 2011 LSV with the non-standard V2 tower. Can't say enough about the boat and the tower, however, the fixed board racks that came with the tower don't fit into our shore station...Having four boards in the boat is beginning to get annoying. I spoke with our dealer and said he has swivel racks from Skier's Choice for around $1200 dollars. That seemed very high in my opinion and I wanted to know if there was any other options for our boat/tower.

Thanks,

Mark

[wolfeman131]

Not many other options for hte V2 (if any) as most aftermarket ones are designed to attach to the tube. That, unfortunately, is the MSRP for those racks. Call Cynde @ Atlanta Marine, mention the Moomba forum and see if she can do better for you.

[bret]

We have this issue also, except we have an aftermarket tower (Monster MT2). Are there 180 degree swivel racks out there that people have used that could recommend?

[moombadaze]

We have this issue also, except we have an aftermarket tower (Monster MT2). Are there 180 degree swivel racks out there that people have used that could recommend?

well since you have a monster tower, have you looked at there swivel racks. I have 2 of them and both will swivel the boards into the boat 180. Im wondering if they would work on the V2 tower for Mark.

[NCSUmoomba]

Since the V2 is the same as the old Malibu Illusion tower, any of those racks should fit your tower. Several manufacturers make racks for those. I am not sure if they are any less expensive, though.

[wolfeman131]

I had the same thought, but I'm not sure if the Moomba design is exactly like it was when on the Malibu. And, you have a valid point in that they probably aren't any less expensive.