Results 1 to 2 of 2
Thread: Keeping slime out of ski locker
07-18-2005, 11:33 AM #1Junior Member
- Join Date
- Jul 2005
Keeping slime out of ski locker
My new LSV has a ballast bag in the ski locker, which is covered in an oily slime,. I assume this came from the bilge..any thoughts on keeping the slime in the bilge and not in the ski compartment..I thought a piece of foam padding to filter the oil out as the water passes between the compartments...
07-18-2005, 12:08 PM #2Junior Member
- Join Date
- Feb 2005
- Calgary, Alberta Canada
Replying to Topic 'Keeping slime out of ski locker'
I had the same problem except that I keep skis in the ski locker. My skis would all have a bilge water film on them.
On my LS the tube that drains the ski locker has an OD of 1-1/2" and is threaded on the outside surface on the engine bilge end. I simply purchased a pipe cap for that size and threaded it on. No more bilge water in my ski locker. and I can remove it whenever I want. My boat has an inspection port in the floor right in front of the tow pylon (LS Model) that made it very easy to get at.
Also considered a simple bathtub drain plug. They come in a good range of sizes. 1-1/4" would have been the correct size for my boat.
By gotmyboat in forum General ChatReplies: 4Last Post: 07-14-2006, 07:14 PM
By mtbracr1 in forum General ChatReplies: 5Last Post: 01-09-2006, 03:43 PM
By csaj4506 in forum General ChatReplies: 6Last Post: 11-16-2004, 03:54 PM
By lowdrag in forum General ChatReplies: 3Last Post: 07-08-2004, 03:23 PM
By moombakid8885 in forum General ChatReplies: 2Last Post: 04-10-2003, 03:57 AM