im still curious how low yall have these aerator pumps mounted in order to get prime without the scupper and forward motion method the stock system requires...
Results 21 to 23 of 23
07-05-2012, 08:50 PM #21David
2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Harpoon, Exile SM600.1 , Exile Xi800.4.
07-05-2012, 09:12 PM #22
If you have the bilge depth, mount the pump directly on top of the ball-valve. If not, then use a 90* elbow between the t-hull and valve, then the pump. Just be sure to keep that upward travel. If the elbow is higher then the pump body, then an air pocket will be trapped in the top of the elbow.
07-06-2012, 02:28 AM #23