Here is a short video on replacing the transmission mount bushing.
Tools 15/16"- 1" wrench, 2- 9/16 wrenches for alignment, come along with chains,feeler gauge, 1-2 beers
I noticed my rubber bushing had mushroomed so I purchased some new mounts from inboardonline.com for a cost of $8.61 each so I would have spares. Only needed one as I believe alot of the weight was being taken on the other mount. The culprit was a raised edge on the casting that trashed the rubber bushing. Checking of these mounts should be added to the summerization process.
Here is the video link.
.
. http://www.youtube.com/watch?v=qwc7iy5T3Ic
Results 1 to 2 of 2
Hybrid View
-
07-02-2012, 11:20 PM #1
Senior Member
- Join Date
- Jul 2002
- Location
- London Ontario Canada
- Posts
- 1,731
Transmission Mount Bushing Replacement
Last edited by DOCDRS; 07-02-2012 at 11:27 PM.
09 21v LAUNCH
run your engine after you change your oil
68 th Member. WS420,HSE Revolution, OJ 466, Acme1157,1100 sacs,Kicker HLCD's n IX500.4, Supra Coolies
Doug
-
Yesterday, 09:05 AM #2
Senior Member
- Join Date
- Jun 2009
- Location
- South West Colorado
- Posts
- 196
Transmission Mount Bushing Replacement
Any insight into what the bushing part number is that you replaced? The inboard online website is not working so I can't see what options there are. Also what extra parts might I need besides the top bushing? I have an 08 lsv.
Thanks in advance for any help.'08 Mobius LSV, Mods- 1100 lb Rear Sacs, IBS Sac, Center 400 Sac, Dedicated thru-hull intakes and pumps per sac, SeaDek One Piece Mica over Black Roo, EZ Net Cargo Nets, Swivel Drivers Seat, Hot Water Shower, Hinged Wind Block, Bow Cushion Adapter Plate for Drink Holders Access, etc, etc.
Reply With Quote