Hoping someone can help me out. I just upgraded my boat to a dual battey system and everything works except my switches for my nav lights, blower, stereo etc. The boat will turn over and my perfect pass is working but none of the switches will work. I can also see that the distribution block to the amps is getting power as it illuminates and shows 12.6 volts.
The only thing I can think it would be is that I removed the wires from the original G1 ballast switch thinking that I did not need them any more as I was planning on re wiring this switch for my 4th reversible ballast pump. Is is possible that I screwed something up by doing this?
I am supposed to be launching the boat tomorrow so if anyone could help me out is would be greatly appreciated.
Results 1 to 9 of 9
07-07-2012, 02:02 AM #1
Upgraded to Dual Battery system and need your help!2011 President's Trophy - Check
2011 Western Confernece Champs - Check
2011 Stanley Cup Champs - Not so Much....
2007 Outback V