Page 1 of 2 12 LastLast
Results 1 to 10 of 22

Hybrid View

  1. #1
    Join Date
    Jun 2007
    Location
    Rice Lake, Ontario
    Posts
    563

    Default request: photo of back of stock deck on 06 LSV

    I am about 180 miles from my boat right now, any chance someone could snap me a photo of the back of the stock deck in a 06 LSV?
    2006 Moomba Mobius LSV
    Lake: Rice lake, Ontario
    Stereo: Kenwood KMR-550U
    Ballast: 750 Surfside locker, 400 Surfside mid boat, 400 Gravity I, 400 Bow
    Surfboards: Inland Surfer Red Woody, Triple X Composite X 58"

    If you're from the area and want to surf, send me a PM!

  2. #2
    Join Date
    Jul 2008
    Location
    Snellville, GA & Lake Sinclair
    Posts
    6,923

    Default

    Snyder,

    Have 2 '08 LSV's sitting 100 ft from me I can take a pic of. Will that help? What, specifically, do you want a pic of?
    Drew
    New ride: 2012 Mojo
    Old ride: 2008 OBV

  3. #3
    Join Date
    Jun 2007
    Location
    Rice Lake, Ontario
    Posts
    563

    Default

    if it's the same deck, just the back of the stereo and the wires running from it.

    thanks!
    2006 Moomba Mobius LSV
    Lake: Rice lake, Ontario
    Stereo: Kenwood KMR-550U
    Ballast: 750 Surfside locker, 400 Surfside mid boat, 400 Gravity I, 400 Bow
    Surfboards: Inland Surfer Red Woody, Triple X Composite X 58"

    If you're from the area and want to surf, send me a PM!

  4. #4
    Join Date
    Jul 2008
    Location
    Snellville, GA & Lake Sinclair
    Posts
    6,923

    Default

    Hmmmmm


    Don't know if it's the same. Do you know your model number?
    Drew
    New ride: 2012 Mojo
    Old ride: 2008 OBV

  5. #5
    Join Date
    Jan 2008
    Location
    Keuka Lake, NY
    Posts
    5,670

    Default

    here is a pic of my keenwood 232 mr that came in my 2007 OBV should be pretty similar

    http://www.sonicelectronix.com/pictu...ture_id=112701


    here is the keenwood mr225 which i think came in the 2006 models page 26 shows the back

    http://www.kenwoodusa.com/UserFiles/.../KDC-MP225.pdf
    Last edited by jmvotto; 07-09-2012 at 08:54 AM.
    A Day at the Lake...Priceless
    A Day in Powder...Endless


    Joe V
    2012 Möbius XLV~ Loaded & Exiled
    2007 Outback V ~ sold

  6. #6
    Join Date
    Jul 2008
    Location
    Snellville, GA & Lake Sinclair
    Posts
    6,923

    Default

    Nice, JV!

    Let me know if you need more, Spyder.
    Drew
    New ride: 2012 Mojo
    Old ride: 2008 OBV

  7. #7
    Join Date
    Feb 2010
    Location
    Canton, Ga / Lake Lanier
    Posts
    1,589

    Default

    I installed my 550u in less than 15 minutes. It really isn't as difficult as it is being made out to be.

    Wire the new harness up to your existing power, speaker, and remote wires, then put your radio in and plug the harness into the new radio. Voila...install complete.


    Sent from my iPhone using Tapatalk
    SOLD! 2011 Mobius LSV 325HP EFI
    Digital Cruise Pro, Wakeplate, Kenwood KM550U and KCA-RC107MR x2, Kicker ZXM700.5, Kicker 6.5 Cabins, 10'' Kicker CompVT sub, Wetsounds SYN 4, Wetsounds REV10s, Wetsounds WS420Q, Gravity VI Surf Ballast, Acme 537

    Board: '12 LF Harley (Monster) 139
    Her Board: '11 Ronix Krush 128
    Kids Board: '13 Ronix Vision 120
    Skate: LF Faction 44
    Surf: LF Custom Quad & XXX


    Tow Rig:
    2011 Toyota Tundra CrewMax TRD Magnetic Grey
    3/1 Truxx Lift, and some other stuff...

  8. #8
    Join Date
    Jun 2007
    Location
    Rice Lake, Ontario
    Posts
    563

    Default

    Quote Originally Posted by E4NASH View Post
    Wire the new harness up to your existing power, speaker, and remote wires
    did you have to do any soldering with hooking up the new harness? was it easy to get access?
    2006 Moomba Mobius LSV
    Lake: Rice lake, Ontario
    Stereo: Kenwood KMR-550U
    Ballast: 750 Surfside locker, 400 Surfside mid boat, 400 Gravity I, 400 Bow
    Surfboards: Inland Surfer Red Woody, Triple X Composite X 58"

    If you're from the area and want to surf, send me a PM!

  9. #9
    Join Date
    Aug 2008
    Location
    Hilliard, Ohio
    Posts
    441

    Default

    Quote Originally Posted by E4NASH View Post
    I installed my 550u in less than 15 minutes. It really isn't as difficult as it is being made out to be.

    Wire the new harness up to your existing power, speaker, and remote wires, then put your radio in and plug the harness into the new radio. Voila...install complete.


    Sent from my iPhone using Tapatalk
    What brand remote do you have? I swapped out my kenwood last week, but lost the external out for the aware remote. Should I hook to the steering wheel wire?

  10. #10
    Join Date
    Jun 2007
    Location
    Rice Lake, Ontario
    Posts
    563

    Default

    Quote Originally Posted by patrick232 View Post
    I swapped out my kenwood last week, but lost the external out for the aware remote. Should I hook to the steering wheel wire?
    i swapped mine out this weekend as well, same thing.. no "plug" on the back of the deck like the old model..

    old model had this plug


    will the aeware work this this wire?
    2006 Moomba Mobius LSV
    Lake: Rice lake, Ontario
    Stereo: Kenwood KMR-550U
    Ballast: 750 Surfside locker, 400 Surfside mid boat, 400 Gravity I, 400 Bow
    Surfboards: Inland Surfer Red Woody, Triple X Composite X 58"

    If you're from the area and want to surf, send me a PM!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •