How about just removing the platform and putting it in the boat when the boat is moored? I know it's a bit of a pain but most of us have a longer list of things to do before and after boating.
Results 21 to 30 of 31
Thread: Swim Platform Problems
08-08-2012, 08:42 PM #21Al
2006 Mobius LSV
08-08-2012, 09:05 PM #22
08-08-2012, 09:07 PM #23
Now I'm thinking that we may leave the platform off 'til the grandkids arrive, leave it on for the six weeks then take it off when they leave. With the set-screw/shim, how much wear can it get in six weeks?Steve
2010 Mobius LSV
08-08-2012, 09:11 PM #24
08-08-2012, 09:40 PM #25
Have you thought about getting a hoist?
08-08-2012, 10:01 PM #26
Lake Michigan is down two to three feet from historical levels and we can no longer get the Whaler ... much less the Moomba on a lift as we have only 12 inches of water at the end of our dock. And, we would need to extend the dock about 50 feet to approach deeper water.
Lift sits on dry land now waiting for a change. (storage)
Was not too long ago (1986) we had to add large rocks in front of the cottage to keep the water from washing over Beach Drive. It'll come back ... historical highs and lows are in excess of 6 feet.
Last edited by stevep33; 08-08-2012 at 10:13 PM.Steve
2010 Mobius LSV
08-09-2012, 02:55 PM #27
Search posts from Ian Ashton. He tapped out the brackets from the underside and installed set screws to get rid of the slop. This design was integrated into the 2012 brackets.Drew
New ride: 2012 Mojo
Old ride: 2008 OBV
08-09-2012, 09:22 PM #28
Not sure if this is the exact glue they used, but this is the type of product I was referring to. Since you already drilled through your swim platform you are now past the point of no return... I would suggest the following:
1) Once you get the bracket secured on the swim platform, you will have brackets on top of the swimdeck if I understand what you are doing. To help finnish the end result, you may want to consider buying a sea deck platform and recover the entire platform. You could cut out the outline of the brackets if needed, which may actually look ok with an end result of having a flush swim deck once again... Not sure, but it may be worth looking into.
2) If you are really worried about the water pushing up, consider something like this....
This will eliminate the added pressures of the water going up, plus if done right it would look pretty cool (expecially if you get the lights)... Extreme, but may be better and cheaper than buying a whole new deck if your repairs do not actually work.
The washer trick looks good to stop the slop but to be honest, Im not sure that would solve the pressures of the water pushing up on the swim deck... How much transfer of the pressure to the boat brackets is debatable, and to me, not really worth doing, other than to eliminate the clunking sound... Personal preference I think, but Im just a crazy canuck eh!
Good luck... Maybe post some pics if you can... I am interested in your final product as I may have to rethink our fix down the road too...
08-09-2012, 09:51 PM #29
08-09-2012, 10:06 PM #30
Trevor, thanks for the suggestions. Those vents look really nice.
I got the brackets back today all TIG welded with nice new holes drilled.
Plan to re-attach the platform tomorrow. Will use the washer trick to stop the play.
Last of the grandkids go home next Wednesday. After that, I won't need the platform so I'll take it off.
When I pull the boat right after Labor Day, Will look at the inside (engine compartment) to see how the "other" end looks. If necessary, will fabricate backing plates to spread the strain.
Then, next year will only add the platform when the kids arrive and pull six weeks later when they leave. Last year the platform was on for three months in the lake and that is what lead to the first failure.Steve
2010 Mobius LSV