2013 LSV lewisb13 stereo build

[lewisb13]

Let it begin....

uploadfromtaptalk1350001666225.jpg

[mmandley]

Sweet wheres the cabins

[lewisb13]

I think I'm undecided on this issue. I might blow up the stockers first. I kind of want so see how far they can be pushed compared to the db651 I had in my 05. I'll do them eventually for sure.

[moombadaze]

off to a good start, keep the photos coming with the progress

[mmandley]

Everything looks great but im slightly concerned about the Bolt cutters...

[ian ashton]

I think I'm undecided on this issue. I might blow up the stockers first. I kind of want so see how far they can be pushed compared to the db651 I had in my 05. I'll do them eventually for sure.

I first had db651's in my boat, the Exile blow them away.

Chase's LSV had the stock Kickers for a few weeks, they sounded terrible, but that was without an amp - I didn't try them out with power, so I can't speak to that.

[bergermaister]

Ever heard a honda civic with a big coffee can tailpipe rev up compared to a ferarri?


I'm jealous of that channel to route wires under the floor. So much nicer than having to drill, tuck and hide while you twist and contort your body into positions that would rival most Cirque du Soleil acts.

[lewisb13]

Those are crimpers.

[jmvotto]

Those are crimpers.

Industrial size I like, tough to crimp those in the cubby though........

[lewisb13]

I dont think Ill be doing any crimping in the cubby. Just need to crimp the terminal on the piece between the dist block and the battery switch, and then again one crimp between the dist block and the ground on battery 1. Both crimps can be done outside the cubby. Ill try to post pictures as I go. Im gonna start here in a couple hours.