Page 9 of 11 FirstFirst ... 7891011 LastLast
Results 81 to 90 of 102
  1. #81
    Join Date
    Jun 2008
    Location
    De Pere WI
    Posts
    4,433

    Default

    ask some questions. I heard that the wakeplate was not needed on the 23 but was on the 21. try a 750 in the rear locker and you will be plumbing ballast on monday am
    I heard that 2013 they were adding p&p on the options sheet as too many dealers are adding it on their own. easier from the factory.
    '06 Supra Launch 20SSV-gone but never forgotten

  2. #82
    Join Date
    Feb 2008
    Location
    Sylvan Lake, Alberta
    Posts
    475

    Default

    When I upgraded from my 08 XLV I almost went with an MB too but found them quite shallow and I had heard some questionable things about the dealer. Our Moomba dealer here is awesome and so is the Mojo. Two very comparable boats IMO. What I never really loved about the MBs was the look, including the graphics, gel schemes, tower and some of the vinyl patterns. I thought the Moomba was much nicer/more class. The new 2013s are even nicer.
    Levi
    Former owner of a 08 Mobuis XLV, Cat340, 2650 Lbs.
    I miss that boat!

  3. #83
    Join Date
    Dec 2006
    Location
    Tuscaloosa, Alabama
    Posts
    752

    Default

    What is all this?
    Jack Beams
    '05 Outback DD
    325HP EFI Indmar

  4. #84
    Join Date
    Jul 2008
    Location
    Snellville, GA & Lake Sinclair
    Posts
    7,731

    Default

    That was a present from the Christmas spam fairy. Should be gone now.


    Sent from my iPad using Tapatalk HD
    Drew
    2015 Supra SG

  5. #85

    Default

    Will Moomba ever offer a rear facing bench seat? I love the Mojo and think this would be a cool option.

  6. #86
    Join Date
    May 2009
    Location
    Carlton Oregon
    Posts
    6,882

    Default

    Quote Originally Posted by mgswake View Post
    Will Moomba ever offer a rear facing bench seat? I love the Mojo and think this would be a cool option.
    IN time you never know they might go back to one. My thinking is it will be a few years as they just redid the interiors of the boats and modeled them after the 2012 release of the Mojo. The biggest concern is the rear bench now extends accross the entire back of the boat. I have to say this is one of my least favorite changes.

    I dont like when i got o clean the boat that i have to wrangle the whole back seat now. I also dont like how flimsey it is and as another person thought, maybe you can resposition seats and set it across the middle of the boat. Not going to happen without some sort of support. It will simply break in half with anymore then 50lbs on it i think.

    Several boats have options for a rear facing seat but honestly when you look at all of them, they destroy any room in the center of the boat. No long can anyone sit on the sides and put their feet down. This seat is only good if people all sit facing the back and no onere sits in the middle like you normally would.
    Malo <--- Means--Evil or Mean One. This explains a lot.
    2013 Mojo 2.5 Skylon Tower. Bestia < Beast >

    https://vimeo.com/59208513?from=outro-local

  7. #87
    Join Date
    Jul 2011
    Location
    Murrieta, CA
    Posts
    1,247

    Default 2013 Moomba Mojo Review

    Our 2010 XLV has a convertible bench. It can be slid to the middle of the boat and then has support poles so you can put a side cushion from the boat on the supports for a backrest. We have used it a few times but It does seem to eat up a lot of the floorspace of the boat.

    ImageUploadedByTapatalk1360454711.041486.jpgImageUploadedByTapatalk1360454725.902626.jpgImageUploadedByTapatalk1360454754.885302.jpgImageUploadedByTapatalk1360454780.218455.jpg
    2010 Moomba XLV
    340hp cat
    Gravity 3, wake plate
    Rad-a-cage

    I have a love for ballast and large wakes.
    1100 v-drive lockers
    1180 under the playpen
    + lead and a collection of other ballast bags

  8. #88
    Join Date
    Nov 2010
    Location
    Katy, TX
    Posts
    4,513

    Default 2013 Moomba Mojo Review

    Quote Originally Posted by Boonejeepin View Post
    Our 2010 XLV has a convertible bench. It can be slid to the middle of the boat and then has support poles so you can put a side cushion from the boat on the supports for a backrest. We have used it a few times but It does seem to eat up a lot of the floorspace of the boat.

    ImageUploadedByTapatalk1360454711.041486.jpgImageUploadedByTapatalk1360454725.902626.jpgImageUploadedByTapatalk1360454754.885302.jpgImageUploadedByTapatalk1360454780.218455.jpg
    That's a really cool feature. Cheap way to accomplish what the MC does


    Sent from my iPhone
    David

    2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Harpoon, Exile SM600.1 , Exile Xi800.4.

  9. #89
    Join Date
    Jan 2008
    Location
    Keuka Lake, NY
    Posts
    6,532

    Default

    Boone, so that's what it will look like.

    i have yet to use that option on the xlv , nor did we use it on the obv...
    A Day at the Lake...Priceless
    A Day in Powder...Endless


    Joe V
    2012 Möbius XLV~ Loaded & Exiled
    2007 Outback V ~ sold

  10. #90
    Join Date
    Nov 2010
    Location
    Katy, TX
    Posts
    4,513

    Default

    if i had a seat back attachment for mine i would use it more often for sure
    David

    2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Harpoon, Exile SM600.1 , Exile Xi800.4.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •