I've been reading and looking at pics in another thread about placing the subwoofer at the driver's feet, and was wondering if I could do something similar in my boat with a custom-made box (Mobius LSV 2005).
Is that "hump" at the driver's feet, that the helm wires and steering cable go though, removeable (meaning are there screws/bolts holding it in)? I fiddled with it one day and it seemed like it was part of the fiberglass shell and one would have to cut it out of there, but maybe I just didn't feel around enough.
It would be great if it was...then I could get it out of there and mount the subwoofer box in its place.
Results 1 to 5 of 5
11-05-2012, 04:17 PM #1
"Hump" at drivers feet: removeable?===================================
2005 Moomba Mobius LSV
11-05-2012, 04:56 PM #2
I removed mine in the supra. it wasn't hard. it's molded into the fiberglas of the boat. once it was out, I saw no structural reason to have it installed other than a place for skiers to place a sub and as a footrest/divider to the front of the boat. took 10 minutes and a sawzall
there's pics before and after in my old stereo install thread.
several on here have placed boxes on top of that, but I found it to be cleaner to remove it in my particular case.'06 Supra Launch 20SSV-gone but never forgotten
11-05-2012, 05:33 PM #3Senior Member
- Join Date
- Jan 2008
- Pensacola, FL
Research before cutting your boat. Contact SC directly.1997 MasterCraft 205
2008 Moomba Outback
1999 MasterCraft Sportstar OB
1992 MasterCraft 205
1999 Malibu Response LX
1987 Marlin Magnum Skier
11-05-2012, 05:33 PM #4
Scope Newty's profile and the Album 'My Moomba Mods' - although his is newer, probably the same hump. Shows how he cut it out and reglassed it.
This link may work? http://www.moomba.com/msgboard/album.php?u=33592001 MobiusV
11-05-2012, 06:24 PM #5
I, and by that I mean Dusty, set ours up to sit on the hump and come forward a few inches. It doesn't go all the way to the ground so no leg room lost.2006 Supra 24SSV