Results 1 to 10 of 15
Thread: New amp
02-08-2013, 07:30 PM #1
I know its not the big guns most of yall install...but it is gonna really do my modest system some good...kids permitting I will be installing tomorrow
From me phone'08 Mobius LS
02-08-2013, 09:14 PM #2
Nice stuff, post up your work...
for the towers or cabins?A Day at the Lake...Priceless
A Day in Powder...Endless
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
02-08-2013, 11:38 PM #3
She's a beaut Clark.
Looks real familiar too!I do all my own stunts
2001 MobiusV - Slightly Modified...
02-09-2013, 09:12 AM #4
new electronics are ALWAYS fun. hope the sound far exceeds your expectations..'06 Supra Launch 20SSV-gone but never forgotten
02-09-2013, 09:16 AM #5
That's a great little amp - I have one that I'll be putting in what is now dad's '08 Outback to power the cabin speakers.BoatBling Moomba forum member discount thread
2013 Outback V
02-09-2013, 09:35 AM #6
Yep I have that one on my Wetsounds Pro 60s
Sent from my iPhone using TapatalkSOLD! 2011 Mobius LSV 325HP EFI
Digital Cruise Pro, Wakeplate, Kenwood KM550U and KCA-RC107MR x2, Kicker ZXM700.5, Kicker 6.5 Cabins, 10'' Kicker CompVT sub, Wetsounds SYN 4, Wetsounds REV10s, Wetsounds WS420Q, Gravity VI Surf Ballast, Acme 537
Board: '12 LF Harley (Monster) 139
Her Board: '11 Ronix Krush 128
Kids Board: '13 Ronix Vision 120
Skate: LF Faction 44
Surf: LF Custom Quad & XXX
2011 Toyota Tundra CrewMax TRD Magnetic Grey
3/1 Truxx Lift, and some other stuff...
02-11-2013, 07:08 AM #7
Well... the kids slumber party took all the energy out of me. Will do it this coming weekned. It will be running my tower speakers and sub.'08 Mobius LS
02-15-2013, 08:17 AM #8
Hey yall, can I make my own power cords or is it better to buy kit? I wanna tackle this thing tomorrow. Also, am I going to need to hook up the "rem" wire as well? Please remember I am tying this into the existing 200 watt stock amp.'08 Mobius LS
02-15-2013, 08:28 AM #9
You really need to buy the raw wire per the length you need. The off-the-shelf kits are usually automotive based so they will have too much B+ wire and not nearly enough ground wire.
02-15-2013, 08:46 AM #10
I would reccomend you measure out how much wire you need to power, and ground the amp.
Goto your local Car Audio shop and ask them for X amount of Power, Ground cable in 4 guage.
You can get 18 guage wire at any hardware shop or that same car Audio shop for the Remote wire.
Yes you have to connect the Remote wire, it is what tells that amp to turn on. You can how ever just connect it to the other amp at the Remote wire connection.Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >