Page 2 of 2 FirstFirst 12
Results 11 to 19 of 19
  1. #11
    Join Date
    Jun 2012
    Location
    Sugar Land, TX
    Posts
    587

    Default

    I ordered the Samson mirror for our LSV, should be here this week.
    2011 Mobius LSV

    Ron

  2. #12
    Join Date
    Jul 2012
    Location
    Cumming Ga
    Posts
    295

    Default

    How do you do the rope mount?


    Quote Originally Posted by rdlangston13 View Post
    we use it in a variety of ways, mounted on a pole with someone holding it filming from a tube, helmet mount, board mount, rope mount, and sometimes tower mount

  3. #13
    Join Date
    Nov 2010
    Location
    Katy, TX
    Posts
    4,105

    Default

    Get a 1/2" or 3/4" (can't remember exactly what I used) and cut it to 6 ft. The drill a 1/4 hole or so in one end about 2 inches up from the end. Then take a saw and cut up the short end to the hole you drilled. Now slide the rope through the PVC with the side with the hole toward the rope handle. Once the pipe has reached the "Y" in the handle you can slide the branches of the "Y" up the slits you cut until one side is coming out of each hole. Then you want to wrap the end with electrical tape, this will keep the camera up right with the handle. Use the go pro handle bar mount to install it at the end of the 6 ft pipe.


    Sent from my iPhone newtys droid killer using Tapatalk
    David

    2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Harpoon, Exile SM600.1 , Exile Xi800.4.

  4. #14
    Join Date
    Nov 2010
    Location
    Katy, TX
    Posts
    4,105

    Default

    And here is the result










    Sent from my iPhone newtys droid killer using Tapatalk
    David

    2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Harpoon, Exile SM600.1 , Exile Xi800.4.

  5. #15
    Join Date
    Jul 2012
    Location
    Cumming Ga
    Posts
    295

    Default

    Looks like an easy enough setup. I am going to give this a try this year. I had the go-pro mounted on the board but the videos are never really that good. I also mounted the camera on the back of the boat but again the video is never that great when wakeboarding because its so far away.

  6. #16
    Join Date
    Nov 2010
    Location
    Katy, TX
    Posts
    4,105

    Default

    This yields bad video as well, good for still shots tho


    Sent from my iPhone newtys droid killer using Tapatalk
    David

    2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Harpoon, Exile SM600.1 , Exile Xi800.4.

  7. #17
    Join Date
    Jan 2008
    Location
    Keuka Lake, NY
    Posts
    5,672

    Default

    What's the electrical tape wrapped every foot or so up the PVC ?
    A Day at the Lake...Priceless
    A Day in Powder...Endless


    Joe V
    2012 Möbius XLV~ Loaded & Exiled
    2007 Outback V ~ sold

  8. #18
    Join Date
    Nov 2010
    Location
    Katy, TX
    Posts
    4,105

    Default

    The handlebar mount was slightly too big so I put a good wrap of tape every foot to have multiple mounting locations and tighten up the fit a little


    Sent from my iPhone newtys droid killer using Tapatalk
    David

    2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Harpoon, Exile SM600.1 , Exile Xi800.4.

  9. #19
    Join Date
    Jan 2008
    Location
    Keuka Lake, NY
    Posts
    5,672

    Default

    Quote Originally Posted by rdlangston13 View Post
    The handlebar mount was slightly too big so I put a good wrap of tape every foot to have multiple mounting locations and tighten up the fit a little


    Sent from my iPhone newtys droid killer using Tapatalk
    Got it thanks
    A Day at the Lake...Priceless
    A Day in Powder...Endless


    Joe V
    2012 Möbius XLV~ Loaded & Exiled
    2007 Outback V ~ sold

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •