Bestia the 2013 Moomba Mojo

[jpetty3023]

get yer plasti dip on!


sent from my home phone

[viking]

gonna be tuff to do your rubrail to match ha ha

[ian ashton]

Heater after the custom box is built? I'd be nervous that the heater needs to go where the box is built.

[Boonejeepin]

My heater is on the observer side. I am sure AWS will work around all the stereo stuff. And, there is a lot of stereo stuff!!!!

[mmandley]

Heater after the custom box is built? I'd be nervous that the heater needs to go where the box is built.

When speaking to AWS about the heater, it was there idea to do all the stereo stuff first. I had mentioned i really didn't like the vents in the walk threw, because only the driver and observer can use them. So what my plan is, i think I'm going to mount the heater right behind the drivers seat in the storage bay, so its opposite of the battery storage. This way the vents will reach everyone in the main cabin all the time.

As Boonejeepin mentioned there is a lot of stereo gear, but this boat is so big, it doesn't look crowded. Just dropped her off at King Pin today. They went over the design and type of enclosure.

They are going to build a fiberglass down fire box with a panel in front to enclose the area. Should look real sweet. Honestly due to all the cables in the floor, the box wont be as fare back as i wanted but it should still be fine. I am sacrificing a little more foot room, about 4 inches more then i wanted but with the new captains area and the seat being installed farther away from the dash then the LSV it should still feel larger then the LSV's foot area on Fierah did.

Also working on a custom battery enclosure to cover my now installed 6v golf cart batteries that will power the new stereo all day with no issues.

[mmandley]

gonna be tuff to do your rubrail to match ha ha

HAHA yea but I'm going to leave it chrome and white. I think im done with Plasti Dip for now. I learned a lot doing it, good things and bad things. Once the boat is all done ill post all the pictures and a write up on the plasti dip for the letters.

I think a lot of people will be doing it.

At AWS today i showed both the General Manager and Sales Manager the pictures and they were stoked, and had a lot of questions on how i did it, do and dont's.

[mmandley]

Give company some pictures and they are leaked out LOL. Exile Posted these pics i took yesterday.

[KG's Supra24]

hells to the yes on the tint ... lookin good

[moombadaze]

hells to the yes on the tint ... lookin good

you got that right


really like the blackout letters, now you really got me thinking

[jimmylsv]

I dont post much, but that boat is SICK. I can only imagine what it sounds like. Love the tower. Nice Set Up.