2013 lsv

[sandm]

seems to be a lot of variance there. I have a 7ft door and it's actually 6ft10in to the rubber seal. last house was 9ft and they were a true 9ft from concrete to header.


if I have to deal with this garage for another year, going to "shave" 2" off the top framing to get a true 7ft. it's too close right now.

[kaneboats]

Admit it, this makes it so much easier to sit in the boat and have a beer and daydream about surfing LOL

I actually like to go out there and put on some tunes and have a coupla cold ones and do some detail cleaning every now and then. It will be way easier with the tower up.

[chawk610]

We've done our share of garage boating.

[snyderaaron]

Our 2008 LSV wouldn't clear our 7 foot door no matter how low the tongue was

My 2010 won't fit either, off by about 3 inches.

[rdlangston13]

My 2010 won't fit either, off by about 3 inches.

that's about what ours is off by. 2-3"

[mcdye]

that's about what ours is off by. 2-3"

'10 LSV,Tandem,factory 14' rims. I use a floor jack and a lower hitch ball just to get my in and out....It takes about 15 min to get it and hooked road ready. My garage height is 83.5" with a downward apron to the door. It rubs the rubber seal but it fits.

[chadjitsu1]

How much room do you need deep. I have an 08 but a pretty small garage. I can get it under the garage door I'm sure but even with the swing away tongue on the trailer i'm not sure i have enough room deep. I would love to get a head start on some of these projects and have the boat at the house, but I'm not aloud to have it in the driveway according to the HOA.

[E4NASH]

How much room do you need deep. I have an 08 but a pretty small garage. I can get it under the garage door I'm sure but even with the swing away tongue on the trailer i'm not sure i have enough room deep. I would love to get a head start on some of these projects and have the boat at the house, but I'm not aloud to have it in the driveway according to the HOA.

Same problem here...HATE HOAs


Sent from my iPhone using Tapatalk

[rdlangston13]

our new garage is going to be 20' 10.5" deep and 21' 6" wide. I know there is no way it will fit normal but would it squeeze in at an angle??

[jpetty3023]

our new garage is going to be 20' 10.5" deep and 21' 6" wide. I know there is no way it will fit normal but would it squeeze in at an angle??

10.5 deep. that don't sound right bro


sent from my home phone