Has anyone had any luck cleaning their cans? Mine are faded and not shiny anymore and have some scratches. Any suggestion would be great.
Results 1 to 2 of 2
Thread: Tower Speaker Cleaning
02-22-2013, 11:56 PM #1Member
- Join Date
- Apr 2012
Tower Speaker Cleaning
02-23-2013, 06:41 AM #2
You didn't specify but I'm assuming you have polished aluminum pods. In order to be spun (shaped) or cast, it is a softer and more vulnerable aluminum prone to oxidation.
When they get heavy oxidation it really takes some elbow grease to restore them.
Spot address the scratches with a stronger polishing compound. Then buff out the entire pod with the finest polishing compound. Plenty of choices at an automotive supply.
Maintain the pods with a pure carnuba wax (no cleaner wax). Use only a terrycloth or worn cotton cloth. Apply several times per season.
Avoid paper towels when cleaning--too abrasive.
Powdercoating is a good long term solution. If it is a cast pod, it really needs to be baked in an oven (by the powdercoater) beforehand.