Results 1 to 7 of 7
  1. #1
    Join Date
    Feb 2010
    Location
    Canton, Ga / Lake Lanier
    Posts
    1,599

    Default Roswell surf racks

    I'm going to add two Roswell swivel racks soon and I'm wondering if I should get two of the surf racks or one surf and one wakeboard rack. Does anyone have the surf rack? Will the surfboard slot hold a skim style board ok? I have two surf boards and both are skim style. I know they fit fine in the stock factory racks. I'm sure I will get a surf style board before too long so that is why I'm getting at least one surf rack.

    We are going to keep the factory racks on for if we have more than 4 boards on the boat. We usually go out with 3 wake boards, 2 surf boards, and this will be our first season with a skate (LF Faction) on board. Will the skate fit in the wakeboard rack or should it go in the surf slot. If it should go in the surf then I'll probably go with 2 surfs. Will the surf slot hold a wakeboard ok too?

    I'd like to swap out the factory racks with another set of these swivel racks but they are far too spendy for 2 sets. Or maybe we just carry too much gear. I suppose a Z5 or the Monster tower version would solve that...

    Wow! Sorry for the rambling...


    Sent from my iPhone using Tapatalk
    SOLD! 2011 Mobius LSV 325HP EFI
    Digital Cruise Pro, Wakeplate, Kenwood KM550U and KCA-RC107MR x2, Kicker ZXM700.5, Kicker 6.5 Cabins, 10'' Kicker CompVT sub, Wetsounds SYN 4, Wetsounds REV10s, Wetsounds WS420Q, Gravity VI Surf Ballast, Acme 537

    Board: '12 LF Harley (Monster) 139
    Her Board: '11 Ronix Krush 128
    Kids Board: '13 Ronix Vision 120
    Skate: LF Faction 44
    Surf: LF Custom Quad & XXX


    Tow Rig:
    2011 Toyota Tundra CrewMax TRD Magnetic Grey
    3/1 Truxx Lift, and some other stuff...

  2. #2
    Join Date
    Aug 2011
    Location
    Charlotte, nc
    Posts
    114

    Default

    not to highjack but my question coincides with this. Has anyone added just the swivel piece to their existing factory roswell racks?
    2014 SC350
    2012 LSV - sold

  3. #3
    Join Date
    Feb 2010
    Location
    Canton, Ga / Lake Lanier
    Posts
    1,599

    Default Roswell surf racks

    Quote Originally Posted by freshturk View Post
    not to highjack but my question coincides with this. Has anyone added just the swivel piece to their existing factory roswell racks?
    The Moomba factory tines do not have the Roswell plate, that is what needs to mount to the swivel. So just the tines will not work.


    Sent from my iPhone using Tapatalk
    SOLD! 2011 Mobius LSV 325HP EFI
    Digital Cruise Pro, Wakeplate, Kenwood KM550U and KCA-RC107MR x2, Kicker ZXM700.5, Kicker 6.5 Cabins, 10'' Kicker CompVT sub, Wetsounds SYN 4, Wetsounds REV10s, Wetsounds WS420Q, Gravity VI Surf Ballast, Acme 537

    Board: '12 LF Harley (Monster) 139
    Her Board: '11 Ronix Krush 128
    Kids Board: '13 Ronix Vision 120
    Skate: LF Faction 44
    Surf: LF Custom Quad & XXX


    Tow Rig:
    2011 Toyota Tundra CrewMax TRD Magnetic Grey
    3/1 Truxx Lift, and some other stuff...

  4. #4
    Join Date
    Feb 2010
    Location
    Canton, Ga / Lake Lanier
    Posts
    1,599

    Default Roswell surf racks

    Also, you will need to buy the universal clamp as well...separately...to mount the rack to the tower. Neither the swivel nor the rack comes with the clamp...


    Sent from my iPhone using Tapatalk
    SOLD! 2011 Mobius LSV 325HP EFI
    Digital Cruise Pro, Wakeplate, Kenwood KM550U and KCA-RC107MR x2, Kicker ZXM700.5, Kicker 6.5 Cabins, 10'' Kicker CompVT sub, Wetsounds SYN 4, Wetsounds REV10s, Wetsounds WS420Q, Gravity VI Surf Ballast, Acme 537

    Board: '12 LF Harley (Monster) 139
    Her Board: '11 Ronix Krush 128
    Kids Board: '13 Ronix Vision 120
    Skate: LF Faction 44
    Surf: LF Custom Quad & XXX


    Tow Rig:
    2011 Toyota Tundra CrewMax TRD Magnetic Grey
    3/1 Truxx Lift, and some other stuff...

  5. #5
    Join Date
    Feb 2012
    Location
    St. Albert, Alberta, Canada
    Posts
    169

    Default Roswell surf racks

    And it won't swivel properly, because of the angle of the rear tube. I'm looking at getting a square block welded on the tube, so it sits level with the boat, and will clear some XM9's. ImageUploadedByTapatalk1362265667.330573.jpgImageUploadedByTapatalk1362265697.879675.jpg

    And the surf tines fit a Ronix Koal no problem. I'll get pics of the throat measurement when I get home.


    Sent from my iPhone using Tapatalk
    2010 MOOMBA LSV
    340 CAT
    ACME 1235
    3100#'s




  6. #6
    Join Date
    Jan 2008
    Location
    Tallahassee, FL
    Posts
    11,347

    Default

    Quote Originally Posted by E4NASH View Post
    I'm going to add two Roswell swivel racks soon and I'm wondering if I should get two of the surf racks or one surf and one wakeboard rack. Does anyone have the surf rack? Will the surfboard slot hold a skim style board ok? I have two surf boards and both are skim style. I know they fit fine in the stock factory racks. I'm sure I will get a surf style board before too long so that is why I'm getting at least one surf rack.

    We are going to keep the factory racks on for if we have more than 4 boards on the boat. We usually go out with 3 wake boards, 2 surf boards, and this will be our first season with a skate (LF Faction) on board. Will the skate fit in the wakeboard rack or should it go in the surf slot. If it should go in the surf then I'll probably go with 2 surfs. Will the surf slot hold a wakeboard ok too?

    I'd like to swap out the factory racks with another set of these swivel racks but they are far too spendy for 2 sets. Or maybe we just carry too much gear. I suppose a Z5 or the Monster tower version would solve that...

    Wow! Sorry for the rambling...


    Sent from my iPhone using Tapatalk
    That's OK. We can help you pick the flower colors for your wedding too. Oh wait. You are already married. Maybe we can help with the drapes. Sure. Just post up all your possible color choices and we'll get Dusty to make a recommendation. What are you asking???????????????????????????
    My Mom said I'm not allowed to get wet!
    2008 LSV
    2000 Outback LS (sold)
    Exile Tunes
    PWI
    LLTR!!!!!!!!



  7. #7
    Join Date
    Feb 2010
    Location
    Canton, Ga / Lake Lanier
    Posts
    1,599

    Default Roswell surf racks

    Quote Originally Posted by kaneboats View Post
    That's OK. We can help you pick the flower colors for your wedding too. Oh wait. You are already married. Maybe we can help with the drapes. Sure. Just post up all your possible color choices and we'll get Dusty to make a recommendation. What are you asking???????????????????????????
    Basically will the Roswell Surf rack hold a wakeboard, skim style surf, or wake skate securely enough in the surfboard slot?


    Sent from my iPhone using Tapatalk
    SOLD! 2011 Mobius LSV 325HP EFI
    Digital Cruise Pro, Wakeplate, Kenwood KM550U and KCA-RC107MR x2, Kicker ZXM700.5, Kicker 6.5 Cabins, 10'' Kicker CompVT sub, Wetsounds SYN 4, Wetsounds REV10s, Wetsounds WS420Q, Gravity VI Surf Ballast, Acme 537

    Board: '12 LF Harley (Monster) 139
    Her Board: '11 Ronix Krush 128
    Kids Board: '13 Ronix Vision 120
    Skate: LF Faction 44
    Surf: LF Custom Quad & XXX


    Tow Rig:
    2011 Toyota Tundra CrewMax TRD Magnetic Grey
    3/1 Truxx Lift, and some other stuff...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •