I am looking at buying an impeller puller to make my life a lot easier. I found two puller online, one by
Sea-Dog Stainless Steel Impeller Puller for $44.99 and Jabsco Flexible Impeller Puller for $89.99. Can anyone tell me if the Sea-Dog SS Impeller puller is worth the money or just spend the extra money for the Jabsco puller?
Results 1 to 10 of 15
Thread: Impeller Puller
03-03-2013, 10:05 PM #1Member
- Join Date
- Jan 2013
Impeller Puller2007 Moomba Outback V
03-04-2013, 02:16 AM #2
Yikes... Instead of $50-90 I'm thinking something like this along with a little WD-40 would do the trick.
Unless you plan to be pulling a lot of impellers."If your work speaks for itself - don't interrupt"
03-04-2013, 08:48 AM #3
Never used a puller myself, 2 screwdrivers and a pair of pliers and a little brute force and out it comesHey, Its Moomba time
13 Mobius LSV
08 Mobius LSV-sold
03 Mobius LSV-sold
03-04-2013, 09:51 AM #4
Spray the impeller shaft with WD40, pull the coil wire off, bump the motor over a few times, then I use 2 paint can openers to pull it out....
03-04-2013, 11:31 AM #5Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
6 SX65M Cabins
6 XM9 Towers
1 XI Big 15 Woofer in a custom Fiberglass box
1 XI 1K Harpoon
2 XI 800.4
1 XI 2500.1
2 Interstate 2400U 6V Golf Cart Batterties
Custom 1 Off Evolution Cover
03-04-2013, 12:21 PM #6
Mine new one always seems to come with a little packet of silicone lube to lube it up for reinstall.
I used the dual vice grip method, oil, bump, install two pairs of vice grips 180 degrees from each other and pull like hell...sometimes it may not be useable as a back up when it gets out but it gets it out...David
2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM7, Exile SXT65Q, Exile XI12D, Exile Harpoon, Exile SM600.1 , Exile Xi800.4.
03-05-2013, 01:19 PM #7Senior Member
2005 Mobius LSV
- Join Date
- Apr 2010
- saskatchewan, canada
Gravity IV (750s rear, 400 mid and 650 bow)
wakeplate, perfect pass,
Not sure what stereo I have, but I have 3 amps 2 subs 6 x 6.5 mids and tweets and 4 tower speakers ( 2 x 8 inch and 2 x 6.5 and tweets)
1433 acme prop
03-05-2013, 03:54 PM #8
I remove the impeller every season using a pair of locking needle nose vise grips as shown. Works great.
Grip the impeller as shown. Apply gentle pressure, just enough to lock the vise grips.
2006 Mobius LSV
03-04-2013, 02:25 PM #9Senior Member
- Join Date
- Jun 2010
- Lake Houston
Re: Impeller Puller
Two paint can openers works perfect2013 LSV
2005 LSV - SOLD
03-04-2013, 02:46 PM #10