Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: Impeller Puller

  1. #11
    Join Date
    Apr 2010
    Location
    saskatchewan, canada
    Posts
    321

    Default

    Quote Originally Posted by mcdye View Post
    Spray the impeller shaft with WD40, pull the coil wire off, bump the motor over a few times, then I use 2 paint can openers to pull it out....
    only i used one pair on needle nose pliers and it came right out
    2005 Mobius LSV

    Gravity IV (750s rear, 400 mid and 650 bow)
    wakeplate, perfect pass,

    Not sure what stereo I have, but I have 3 amps 2 subs 6 x 6.5 mids and tweets and 4 tower speakers ( 2 x 8 inch and 2 x 6.5 and tweets)

    Fuel Injected
    1433 acme prop

  2. #12
    Join Date
    Dec 2006
    Location
    Tigard, Oregon
    Posts
    3,016

    Default

    I remove the impeller every season using a pair of locking needle nose vise grips as shown. Works great.



    Grip the impeller as shown. Apply gentle pressure, just enough to lock the vise grips.
    Al

    2006 Mobius LSV

  3. #13
    Join Date
    Jan 2013
    Location
    Northeast, PA
    Posts
    98

    Default

    Thank you Al, the needle nose worked It was not easy because the previous owner didn't ever change it. I sprayed it with WD-40, bump the motor and let sit over night. The next day bumped the motor again and used the needle nose. It took about 30 mins to work it out but it finally came and the new one is in. I was shocked that it still looked new after 143 hrs on it. Thanks everyone for your help....
    2007 Moomba Outback V

  4. #14
    Join Date
    Aug 2006
    Location
    Baton Rouge, LA / Big Bay Lake, MS
    Posts
    2,246

    Default Impeller Puller

    On my lsv I would remove the support arm on the impeller pump and that allowed the pump to spin freely and grip the impeller with pliers. The rocking action sure helped free it up.
    Brad

    Mississippi/Louisiana
    2011 Launch 21V
    2006 Moomba Mobius LSV sold
    2004 Outback sold

  5. #15
    Join Date
    Apr 2006
    Location
    Live in Little Rock, Ar
    Posts
    38

    Default

    One other option. Harbor Freight sells some standard pullers (3 and 4 fork) in a package that works awesome. Around $25 bucks if I remember correctly in a 3 pack (small, med, large). Works awesome.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •