Page 2 of 2 FirstFirst 12
Results 11 to 20 of 20
  1. #11
    Join Date
    Sep 2005
    Location
    Claytor Lake, VA
    Posts
    274

    Default

    It has a smoke tint cover. Follow the black 1/4" tubing. Here is a pic of the tank/pump unit.

    http://www.bennetttrimtabs.com/image...g/V351HPU1.jpg
    2005 Mobius LSV

  2. #12
    Join Date
    Oct 2008
    Location
    Arkansas
    Posts
    557

    Default

    Found a pic of my '02 LSV with the pump location.
    Attached Images Attached Images

  3. #13
    Join Date
    Aug 2011
    Posts
    749

    Default

    Quote Originally Posted by mcdye View Post
    Found a pic of my '02 LSV with the pump location.

    Mine is in the engine compartment near the pylon..
    2002 Moomba Mobius LSV

  4. #14
    Join Date
    Jun 2011
    Location
    Bryan, Texas
    Posts
    47

    Default Wake plate problems

    Finally got around to looking into my wake plate problem. Works been killing me!! It was low on fluid so I added some which helped. But it will not go lower than level with the boat. Took the lower screws off to make sure the plate was not jammed. Still won't go any lower. Does anyone Have a suggestion?? Thanks!
    2004 Mobius LSV

  5. #15
    Join Date
    Jun 2009
    Location
    South West Colorado
    Posts
    292

    Default Wake plate problems

    That's about as low as mine will go on my 08. Mine goes only just past the plane of the hull. How much further are you thinking it should go?
    '08 Mobius LSV, Mods- 1100 lb Rear Sacs, IBS Sac, Center 400 Sac, Dedicated thru-hull intakes and pumps per sac, SeaDek One Piece Mica over Black Roo, EZ Net Cargo Nets, Swivel Drivers Seat, Hot Water Shower, Hinged Wind Block, Bow Cushion Adapter Plate for Drink Holders Access, etc, etc.

  6. #16
    Join Date
    Sep 2005
    Location
    Claytor Lake, VA
    Posts
    274

    Default

    Work the plate up and down a bunch of times and check the fluid level and top it off if needed. My have air in the system that just needs to be worked out.
    2005 Mobius LSV

  7. #17
    Join Date
    Feb 2005
    Location
    Ottawa, Ontario, Canada
    Posts
    664

    Default

    Could someone please post the specific kind of fluid needed? I need to top mine up, but the owner's manual does not specify. I'll buy some today to top up at the lake tomorrow at the marina (which is where my boat is).

    Thanks in advance.
    2005 XLV, upgraded ballast, Comptech swivel wakeboard and hydrofoil racks, Monster cargo bimini

  8. #18
    Join Date
    Feb 2005
    Location
    Ottawa, Ontario, Canada
    Posts
    664

    Default

    Quote Originally Posted by Ian Brantford View Post
    Could someone please post the specific kind of fluid needed? I need to top mine up, but the owner's manual does not specify. I'll buy some today to top up at the lake tomorrow at the marina (which is where my boat is).

    Thanks in advance.
    I know that it's ATF. I want to know what kind specifically. For example, the transmission takes Dextron III.
    2005 XLV, upgraded ballast, Comptech swivel wakeboard and hydrofoil racks, Monster cargo bimini

  9. #19
    Join Date
    Aug 2011
    Posts
    749

    Default Re: Wake plate problems

    Same stuff...

    http://www.bennetttrimtabs.com/trimtabtips.php

    Sent from my Nexus 4 using Tapatalk 2
    2002 Moomba Mobius LSV

  10. #20
    Join Date
    Feb 2005
    Location
    Ottawa, Ontario, Canada
    Posts
    664

    Default

    Quote Originally Posted by parrothd View Post
    So, any ATF will do. Asked and answered. Thanks!
    2005 XLV, upgraded ballast, Comptech swivel wakeboard and hydrofoil racks, Monster cargo bimini

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •