Page 1 of 2 12 LastLast
Results 1 to 10 of 18
  1. #1

    Default Drivers seat riser tube

    Does anyone know where to get a taller riser tube. I would like to raise my drivers seat and was wondering if you can just get a longer tube anywhere?
    2014 Fire Red Metal Flake LSV
    MMATS and 8" HLCD Audio Formz

  2. #2
    Join Date
    Jun 2007
    Location
    Vancouver, WA
    Posts
    4,113

    Default

    By tube do you mean a pedestal?

    I'd like to find a slightly taller one or even adjustable one. But mine is very short to begin with and haven't found scratch when I've looked.
    Old enough to know better, young enough to do it anyway.

    2001 MobiusV

  3. #3

    Default

    Yes just the tube. I've looked just came up empty. With heavy weight and an ibs the nose is high even with the bolster folded it is still hard to see.
    2014 Fire Red Metal Flake LSV
    MMATS and 8" HLCD Audio Formz

  4. #4
    Join Date
    Jun 2007
    Location
    Vancouver, WA
    Posts
    4,113

    Default

    Gotcha. Most of the ones I've come across start at 12" height and go up for there. No bueno...

    http://www.attwoodmarine.com/store/c...l-eze/seasport
    Old enough to know better, young enough to do it anyway.

    2001 MobiusV

  5. #5
    Join Date
    Jan 2014
    Location
    Sherwood, OR
    Posts
    88

    Default

    I need one as well. I am 6'3" but the wife is 5'6" and struggles to get good visibility. And you know what that means for me = shorter sets behind the boat.
    2014 Moomba Mondo - Exile Tower/Sub/ZLD/Amps (2x), Hertz Cabin - Evolution Cover - 650 IBS, 900s Rear, Center Hard Tank, Flow

    1969 Bayliner Tahiti - 120 HP Force Outboard - Gone but not forgotten

    -CJ

  6. #6
    Join Date
    Jan 2008
    Location
    Keuka Lake, NY
    Posts
    5,914

    Default

    replace it with an adjustable one


    http://www.overtons.com/modperl/prod...destal&i=28277
    A Day at the Lake...Priceless
    A Day in Powder...Endless


    Joe V
    2012 Möbius XLV~ Loaded & Exiled
    2007 Outback V ~ sold

  7. #7
    Join Date
    Jul 2008
    Location
    Snellville, GA & Lake Sinclair
    Posts
    7,052

    Default

    raise the bolster & put your throwable flotation device on top of it.
    Drew
    New ride: 2012 Mojo
    Old ride: 2008 OBV

  8. #8
    Join Date
    Jul 2014
    Location
    CHenoa, IL
    Posts
    76

    Default

    I sit on my throwable flotation device as said above.
    2003 Moomba Outback with 197 hrs on the 310HP Indmar. Its in Cherry condition also and now we will again start to use the boat after a few years off.

  9. #9
    Join Date
    Jun 2007
    Location
    Vancouver, WA
    Posts
    4,113

    Default

    Anyone else driving usually likes the throwable - I don't. I may just add some aluminum rails between the base and seat to give it a lift. Adjustable would be nice though...

    In hindsight I REALLY wish I would have sprung for an aftermarket seat with Bolster in it prior to the new upholstery job...
    Old enough to know better, young enough to do it anyway.

    2001 MobiusV

  10. #10

    Default

    would those ajustable ones be a bolt in thing or do ya think there would be some fabricating going on on to make them fit?
    2013 outbackv

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •