Not sure, but I think they have used a tower like that for a few yrs now.
Results 11 to 20 of 54
Thread: rev10's on a 2012 mojo
05-05-2013, 08:57 AM #11
rev10's on a 2012 mojoDrew
New ride: 2012 Mojo
Old ride: 2008 OBV
05-05-2013, 10:17 AM #12
The point is to just see how they are staggered, its the best way to keep them out of the way and have walk-though room.Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
6 SX65M Cabins
6 XM9 Towers
1 XI Big 15 Woofer in a custom Fiberglass box
1 XI 1K Harpoon
2 XI 800.4
1 XI 2500.1
2 Interstate 2400U 6V Golf Cart Batterties
Custom 1 Off Evolution Cover
05-05-2013, 12:29 PM #13
Before we introduce other brands and products into the discussion, it would be hard to compare a Rev10 pod to the pods from other brands.
The Rev10 is a 10-inch speaker as compared to the XM9 which is a 8-inch speaker. However, the XM9 has a short depth but wide pod proportionally. So there is not that much pod diameter difference as would be expected with the speaker size difference. The Rev10 is substantially deeper but adds little pod diameter beyond what is required to facilitate a 10" driver.
The Rev8 fits the XM9 8-inch class based on cone area (within 5/16" of one another), and has an equivalent pod displacement. however, the Rev8 is proportionally much deeper with a much smaller pod width.
The 10" Rev10 is definitely the way to go IMO, as it gives you two/thirds more surface area than an 8" and 75% the surface area of twice as many 8". Not to mention that the 10" and larger pod deliver deeper midbass extension.
If you are going to run a pair of Wetsounds Rev10s at the radius, corner of the tower, or a more vertical (but leaning) portion of the tower, you will want to get the Wetsounds swivel collars.
05-05-2013, 04:30 PM #14
rev10's on a 2012 mojo
If you really want a head knocker hang a rev410 in the middle
Sent from my iPhoneDavid
2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Harpoon, Exile SM600.1 , Exile Xi800.4.
05-05-2013, 04:45 PM #15
05-05-2013, 05:04 PM #16
Here is a pic of my neighbor's Malibu VLX. We put a pair of Rev 10's on it over the winter. I had my wife, who is 5' 5", stand in the boat for height comparison. I know it's not a Moomba, but it may be close in size. I believe that the tower shape may be similar also. As you can see, the speakers were mounted on the side near the top using swivel mounts. I know that guys are putting 4 to 6 speakers on their towers which is cool, but as far as I am concerned, the sound of just two of these is incredible. I wanted to get a straight on pic, but this was the only shot that I could get where the sun wasn't in the pic. Hope it helps.
2010 Outback V - Sold
05-05-2013, 07:11 PM #17
05-05-2013, 07:30 PM #18
I can also post photos to prove that any statement I made is accurate.
An XM7 is a 6.5" speaker and an XM9 is an 8" speaker. The model numbers could be construed as a bit deceptive.
A unique basket mold has absolutely nothing to do with the speaker class according to an entire industry including automotive, home, pro audio or other. You can represent the speaker to be anything that you want and I can dispute it with objective facts. Here are the facts.
The size classification of a speaker is determined by one industry spec, which is a) the 'Sd' which is b) determined by the effective surface area, which is c) determined by the diameter from the center peak of the surround to the center peak of the surround. There is only one standard and it's a universal industry standard. Plus, there are a number of true 8-inch prominent name brand speakers that are categorized as an 8-inch that have a larger 'Sd' than the Exile XM9. The JL Audio 8W7 is just one example. I'm certain that JL Audio is considered credible by all in the industry.
05-05-2013, 07:37 PM #19
David, what would the benefit of the swivel mount be if I mount them in the arch or side of the tower? Also, do they have quick disconnect nkw?2012 Moomba Mojo
05-05-2013, 07:52 PM #20