Results 1 to 9 of 9

Hybrid View

  1. #1

    Default Speed cluster problem (help)

    My speedometer doesn't want to hold his speed. The arrow is always moving from 0 to the end of the cluster. Sometimes it stays on the speed for about 20-30 sec before going crazy again. Is there anything I can do about it before going to the dealer ($$) ?

    I know I can take off the cluster under the steering wheel but just want to know before if this is a frequent problem.

    Thank you

    Boat is an moomba LSV 09

  2. #2
    Join Date
    Jul 2008
    Location
    Snellville, GA & Lake Sinclair
    Posts
    6,890

    Default

    check the paddlewheel underneath first for any damage, then check wire connections on the inside at both the paddlewheel and all the way to the speedo. You can replace the paddlewheel assembly on your own for not too much $$ (if I remember correctly, Mike Mandley and/or Ian did this) before taking it to the dealer.
    Drew
    New ride: 2012 Mojo
    Old ride: 2008 OBV

  3. #3
    Join Date
    Mar 2010
    Location
    Irondequoit Bay, NY
    Posts
    1,291

    Default

    mine doesnt work haha..but on my outback its to easy to get to..i might replace the wheel assembly
    2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
    Rockford fasgate cabins
    Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
    Exile XM7's
    Exile Harpoon
    Exile ZLD
    Polk 10in sub (2)
    Polk P330 amp (subs)

  4. #4
    Join Date
    Feb 2011
    Location
    Skiatook Lake, Oklahoma
    Posts
    424

    Default Speed cluster problem (help)

    Has anyone heard that excessive trailering can cause the paddle wheel to spin too fast thus messing up sensors. Mine was doing the same thing that you describe but no visible damage. Boat mechanic told me as much as I trailer I should put the blank in while trailering.

    Bought a new paddle wheel on eBay 39.00 i think and fixed problem


    Sent from my iPhone using Tapatalk
    Todd Brooks

    2013 LSV

  5. #5
    Join Date
    Jul 2008
    Location
    Snellville, GA & Lake Sinclair
    Posts
    6,890

    Default

    yes, I have heard that can happen but it might have been on here, so who knows if it's true, or not.
    Drew
    New ride: 2012 Mojo
    Old ride: 2008 OBV

  6. #6
    Join Date
    Mar 2010
    Location
    Irondequoit Bay, NY
    Posts
    1,291

    Default

    huh..never thought about that
    2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
    Rockford fasgate cabins
    Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
    Exile XM7's
    Exile Harpoon
    Exile ZLD
    Polk 10in sub (2)
    Polk P330 amp (subs)

  7. #7

    Default

    Ok thank you i'll check on it

    anyone have a link for a paddle wheel?

    and let you know guys if not i'll look at the connections and the cluster

    at least it's not the cluster

  8. #8

    Default Re: Speed cluster problem (help)

    Paddle wheel is fine

    Connector was ok

    I'm trying this we everything if not it's the cluster

    Sent from my SGH-I747M using Tapatalk 2

  9. #9

    Default Re: Speed cluster problem (help)

    Update *****

    Didnt found out the problem yet

    Paddlewheel is ok and make move the speedometer

    Connections are good on the cluster

    ???????

    I dont know what to do (could it be the cluster or the speed calibration)





    Sent from my SGH-I747M using Tapatalk 2

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •