Page 2 of 2 FirstFirst 12
Results 11 to 19 of 19

Thread: screw lengths?

  1. #11
    Join Date
    Mar 2010
    Location
    Irondequoit Bay, NY
    Posts
    1,298

    Default

    Quote Originally Posted by maxpower220 View Post
    I think you should screw through the hull and use through bolts with thread locker. No one else is doing it and you will be unique.

    Use stainless screws.
    huuhhh..not. a. bad. ideeaaa.. lol
    2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
    Rockford fasgate cabins
    Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
    Exile XM7's
    Exile Harpoon
    Exile ZLD
    Polk 10in sub (2)
    Polk P330 amp (subs)

  2. #12
    Join Date
    Jul 2008
    Location
    Snellville, GA & Lake Sinclair
    Posts
    7,051

    Default

    Quote Originally Posted by motosno963 View Post
    the amp racks are already made, so what would the cutting board be used for
    you don't need it if you have the racks made. simply glue something to the hull (pressure treated wood or hpde blocks) and screw your amp rack to that.
    Drew
    New ride: 2012 Mojo
    Old ride: 2008 OBV

  3. #13
    Join Date
    Nov 2010
    Location
    Katy, TX
    Posts
    4,184

    Default

    Quote Originally Posted by maxpower220 View Post
    I think you should screw through the hull and use through bolts with thread locker. No one else is doing it and you will be unique.

    Use stainless screws.
    just make sure the screw head is on the outside and the nut is on the inside. for looks....
    David

    2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Harpoon, Exile SM600.1 , Exile Xi800.4.

  4. #14
    Join Date
    Jan 2008
    Location
    Pensacola, FL
    Posts
    1,544

    Default

    Quote Originally Posted by rdlangston13 View Post
    just make sure the screw head is on the outside and the nut is on the inside. for looks....
    That's just crazy, you look at the amp on the inside, the head on the inside. Nut on the outside.



    You are likely to get some bad advice on forums. Think it over before starting any project.
    1997 MasterCraft 205

    2008 Moomba Outback
    1999 MasterCraft Sportstar OB
    1992 MasterCraft 205
    1999 Malibu Response LX
    1987 Marlin Magnum Skier

  5. #15
    Join Date
    Mar 2010
    Location
    Irondequoit Bay, NY
    Posts
    1,298

    Default

    caan i rivit everything in? lol
    2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
    Rockford fasgate cabins
    Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
    Exile XM7's
    Exile Harpoon
    Exile ZLD
    Polk 10in sub (2)
    Polk P330 amp (subs)

  6. #16
    Join Date
    Jun 2009
    Location
    South West Colorado
    Posts
    360

    Default screw lengths?

    Sure, just make sure those rivets are stainless. You don't want anything to rust. That would suck...
    '08 Mobius LSV, Mods- 1100 lb Rear Sacs, IBS Sac, Center 400 Sac, Dedicated thru-hull intakes and pumps per sac, SeaDek One Piece Mica over Black Roo, EZ Net Cargo Nets, Swivel Drivers Seat, Hot Water Shower, Hinged Wind Block, Bow Cushion Adapter Plate for Drink Holders Access, etc, etc.

  7. #17
    Join Date
    Jul 2010
    Location
    Vicksburg, MI
    Posts
    534

    Default Re: screw lengths?

    Also make sure that the center of the rivet doesn't pull all the way through. You will have a little hole to deal with.

    Sent from my Droid Charge using Tapatalk 2
    Joe

    2014 LSV
    2010 Outback V - Sold

  8. #18
    Join Date
    Jul 2010
    Location
    Vicksburg, MI
    Posts
    534

    Default Re: screw lengths?

    Kidding aside, here is a link to the Supra forum showing the glued block method.

    http://www.supraboats.com/bbs/showth...?5519-Amp-Rack

    Sent from my Droid Charge using Tapatalk 2
    Joe

    2014 LSV
    2010 Outback V - Sold

  9. #19
    Join Date
    Mar 2010
    Location
    Irondequoit Bay, NY
    Posts
    1,298

    Default

    will look into it
    2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
    Rockford fasgate cabins
    Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
    Exile XM7's
    Exile Harpoon
    Exile ZLD
    Polk 10in sub (2)
    Polk P330 amp (subs)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •