Page 1 of 3 123 LastLast
Results 1 to 10 of 25

Hybrid View

  1. #1
    Join Date
    Jan 2006
    Location
    Jacksonville, FL
    Posts
    398

    Default New water impeller

    Quick question. I have heard that the impeller needs to be installed in the correct position but have never found any definite answer to this. So which end goes in first. The side that just says Johnson or the end with the dots? Or does it matter?
    ImageUploadedByTapatalk1369307901.764965.jpgImageUploadedByTapatalk1369307914.435630.jpg

  2. #2
    Join Date
    Oct 2010
    Location
    Winnipeg, Manitoba
    Posts
    365

    Default

    I think it's talking about which way the fins flex. When the impeller is installed in the housing the fins are bent. They need to be bent according to which way the pump turns.
    past---------------2003 Outback SOLD
    present------------2006 Supra Launch 21V
    possible future-----2013 Mojo

    Ron

  3. #3
    Join Date
    Aug 2011
    Posts
    1,119

    Default Re: New water impeller

    Doesn't matter, when the pump turns the fins will automatically setup the correct direction..

    Sent from my Nexus 4 using Tapatalk 2
    2002 Moomba Mobius LSV - Sold
    2006 Moomba Mobius LSV

  4. #4
    Join Date
    Jan 2008
    Location
    Tallahassee, FL
    Posts
    11,348

    Default Re: New water impeller

    Let's see if this helps. New johnson impeller user manual instructions.



    uploadfromtaptalk1369324550571.jpg

    uploadfromtaptalk1369324576450.jpg

    Sent from my SPH-L710 using Tapatalk 2
    My Mom said I'm not allowed to get wet!
    2008 LSV
    2000 Outback LS (sold)
    Exile Tunes
    PWI
    LLTR!!!!!!!!



  5. #5
    Join Date
    Jan 2006
    Location
    Jacksonville, FL
    Posts
    398

    Default New water impeller

    Thanks guys.

  6. #6
    Join Date
    Jan 2006
    Location
    Jacksonville, FL
    Posts
    398

    Default New water impeller

    I did not receive any glycerine with mine. It came in a box with a gasket. I ordered it from skidim. Can I just put dish washing soap on it?

  7. #7
    Join Date
    Jan 2008
    Location
    Pensacola, FL
    Posts
    1,544

    Default

    I use anti-sieze compound on the shaft. Petroleum can damage the rubber if left on for a while.
    1997 MasterCraft 205

    2008 Moomba Outback
    1999 MasterCraft Sportstar OB
    1992 MasterCraft 205
    1999 Malibu Response LX
    1987 Marlin Magnum Skier

  8. #8
    Join Date
    Jul 2002
    Location
    London Ontario Canada
    Posts
    1,856

    Default

    woooo hooo I see the vaseline no no is slowly spreading
    09 21v LAUNCH

    run your engine after you change your oil
    68 th Member. WS420,HSE Revolution, OJ 466, Acme1157,1100 sacs,Kicker HLCD's n IX500.4, Supra Coolies
    Doug

  9. #9
    Join Date
    Jul 2008
    Location
    Snellville, GA & Lake Sinclair
    Posts
    7,082

    Default New water impeller

    It's so sad that Dusty has left the building as of late. There is so much potential with some of the posts above.
    Drew
    New ride: 2012 Mojo
    Old ride: 2008 OBV

  10. #10
    Join Date
    Nov 2010
    Location
    Katy, TX
    Posts
    4,221

    Default

    Quote Originally Posted by wolfeman131 View Post
    It's so sad that Dusty has left the building as of late. There is so much potential with some of the posts above.

    I was just thinking the same thing earlier today...where has Dusty gone?
    David

    2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Harpoon, Exile SM600.1 , Exile Xi800.4.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •