Page 1 of 2 12 LastLast
Results 1 to 10 of 23

Thread: wiring....

Hybrid View

  1. #1
    Join Date
    Mar 2010
    Location
    Irondequoit Bay, NY
    Posts
    1,298

    Default wiring....

    sooo since i took tomorrow off to go to the drag track with my friends and now it looks like its going to pour all day i decided i will re do the wiring in the amp racks..it started off nice but now i was just trying to get it done for this weekend so i could go out and try it..since it will be cloudy and 60's and my head unit and two batteries wont be here till tuesday i might as well take the time to run these wire again...im also going to have to build my custom sub box that will hold my 2 10" polks and a mount for my ZLD...this whole wiring thing is a pain haha..the hardest part so far was running the tower speakers..anyone know of any nice tower lights? the old one i had were from liquid audio and were toast when i took them off...will add pics hopefully tomorrow
    2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
    Rockford fasgate cabins
    Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
    Exile XM7's
    Exile Harpoon
    Exile ZLD
    Polk 10in sub (2)
    Polk P330 amp (subs)

  2. #2
    Join Date
    Mar 2010
    Location
    Irondequoit Bay, NY
    Posts
    1,298

    Default

    well i hooked everything up and i dont know if i missed something but i the motor wont crank and the amps wont power up..im going to try a few things
    2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
    Rockford fasgate cabins
    Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
    Exile XM7's
    Exile Harpoon
    Exile ZLD
    Polk 10in sub (2)
    Polk P330 amp (subs)

  3. #3
    Join Date
    Jun 2008
    Location
    De Pere WI
    Posts
    4,173

    Default

    I'd say you missed something
    '06 Supra Launch 20SSV-gone but never forgotten

  4. #4
    Join Date
    Oct 2010
    Location
    Lake Wylie NC Area
    Posts
    774

    Default

    Quote Originally Posted by sandm View Post
    I'd say you missed something
    Maybe its the batteries that wont arrive until Tuesday?

    J/K! Gives us more info on what the system and battery scheme consisted of before the upgrades and what you just installed.

  5. #5
    Join Date
    Mar 2010
    Location
    Irondequoit Bay, NY
    Posts
    1,298

    Default

    hooked up all the batteries everything works, fuel will prime but when u turn the key to start it you get nothing
    2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
    Rockford fasgate cabins
    Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
    Exile XM7's
    Exile Harpoon
    Exile ZLD
    Polk 10in sub (2)
    Polk P330 amp (subs)

  6. #6
    Join Date
    Oct 2010
    Location
    Lake Wylie NC Area
    Posts
    774

    Default

    Sounds like the helm BUSS has power but the main starter cable could be connected to the wrong spot or not connected at all. Is the shifter in gear? Kill switch?

    Break out the volt meter start by checking voltage at the main cable on the starter, then the solenoid wire while someone holds the key in the crank position.

  7. #7
    Join Date
    Jun 2009
    Location
    South West Colorado
    Posts
    357

    Default wiring....

    Nice work, Moto! That would have most people running around in circles for a while.
    '08 Mobius LSV, Mods- 1100 lb Rear Sacs, IBS Sac, Center 400 Sac, Dedicated thru-hull intakes and pumps per sac, SeaDek One Piece Mica over Black Roo, EZ Net Cargo Nets, Swivel Drivers Seat, Hot Water Shower, Hinged Wind Block, Bow Cushion Adapter Plate for Drink Holders Access, etc, etc.

  8. #8
    Join Date
    Jan 2008
    Location
    Tallahassee, FL
    Posts
    11,248

    Default

    When you see a troubleshooter or maintenance guide and it says, "inspect wiring" or "inspect all connections", that is exactly what it is talking about.
    My Mom said I'm not allowed to get wet!
    2008 LSV
    2000 Outback LS (sold)
    Exile Tunes
    PWI
    LLTR!!!!!!!!



  9. #9
    Join Date
    Jul 2008
    Location
    Snellville, GA & Lake Sinclair
    Posts
    7,012

    Default wiring....

    Quote Originally Posted by motosno963 View Post


    the culprit to my motor not turning over..i dont know how i caught this
    Sometimes, it's just good being lucky!
    Drew
    New ride: 2012 Mojo
    Old ride: 2008 OBV

  10. #10
    Join Date
    Jun 2008
    Location
    De Pere WI
    Posts
    4,173

    Default

    that's some good karma paying back being able to find that needle in a stack...
    '06 Supra Launch 20SSV-gone but never forgotten

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •