Results 1 to 7 of 7
  1. #1
    Join Date
    Apr 2012
    Location
    Indiana
    Posts
    36

    Default I have a leak....

    photo.jpg
    I know very little about motors but I'm having a leak from the underside of that piece on the left side. Any ideas how I should approach this?
    05 Moomba LSV

  2. #2
    Join Date
    May 2009
    Location
    Carlton Oregon
    Posts
    5,643

    Default

    First need to know what it is lol. Is that the Exhaust from the muffler to the stern where it goes out to the water?
    Malo <--- Means--Evil or Mean One. This explains a lot.
    2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
    Exile ZLD
    6 SX65M Cabins
    6 XM9 Towers
    1 XI Big 15 Woofer in a custom Fiberglass box
    1 XI 1K Harpoon
    2 XI 800.4
    1 XI 2500.1
    2 Interstate 2400U 6V Golf Cart Batterties
    Custom 1 Off Evolution Cover

  3. #3
    Join Date
    Jan 2008
    Location
    Tallahassee, FL
    Posts
    10,666

    Default

    Can you open your picture in "Paint" and draw an arrow showing exactly where the leak is coming from? Then save it and re-post it. Might help.
    My Mom said I'm not allowed to get wet!
    2008 LSV
    Exile Tunes
    PWI
    LLTR!!!!!!!!



  4. #4
    Join Date
    Apr 2012
    Location
    Indiana
    Posts
    36

    Default

    It's on the underside of the exhaust. See the red arrow.
    Attached Images Attached Images
    05 Moomba LSV

  5. #5
    Join Date
    May 2009
    Location
    Carlton Oregon
    Posts
    5,643

    Default

    Quote Originally Posted by redmondson View Post
    It's on the underside of the exhaust. See the red arrow.
    OK if its the muffler, then just take a bolt and screw it in the hole, honestly, it wont hurt anything because on the other side of the muffler is a screw for draining water when winterizing.

    If its on the outbound tune from the muffler then tape it with waterproof tape, its a low temperature system and you only need to stop the water so its not filling the bilge, but its after the engine so its no real panic situation
    Malo <--- Means--Evil or Mean One. This explains a lot.
    2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
    Exile ZLD
    6 SX65M Cabins
    6 XM9 Towers
    1 XI Big 15 Woofer in a custom Fiberglass box
    1 XI 1K Harpoon
    2 XI 800.4
    1 XI 2500.1
    2 Interstate 2400U 6V Golf Cart Batterties
    Custom 1 Off Evolution Cover

  6. #6
    Join Date
    Jan 2008
    Location
    Tallahassee, FL
    Posts
    10,666

    Default

    Quote Originally Posted by mmandley View Post
    OK if its the muffler, then just take a bolt and screw it in the hole, honestly, it wont hurt anything because on the other side of the muffler is a screw for draining water when winterizing.
    You can dab a little gasket sealer on the top of and underside of the screw head if you want.
    My Mom said I'm not allowed to get wet!
    2008 LSV
    Exile Tunes
    PWI
    LLTR!!!!!!!!



  7. #7
    Join Date
    Jul 2002
    Location
    London Ontario Canada
    Posts
    1,815

    Default

    If its at the hull then you need to check you screws on the outside of the hull. you may be able to tighten them if they are loose or clean and reseal the exhaust thru hull with silicone.
    09 21v LAUNCH

    run your engine after you change your oil
    68 th Member. WS420,HSE Revolution, OJ 466, Acme1157,1100 sacs,Kicker HLCD's n IX500.4, Supra Coolies
    Doug

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •