Results 1 to 7 of 7

Thread: Tower parts

  1. #1

    Default Tower parts

    I have a 09 lsv, I need the rubber gaskets that go in between where the tower bolts to the boat. Can someone point me to where I can buy them. Thanks

    Sent from my SCH-I545 using Tapatalk 4 Beta
    2009 moomba Mobius lsv

  2. #2
    Join Date
    May 2009
    Location
    Carlton Oregon
    Posts
    6,020

    Default

    Quote Originally Posted by kregstrong View Post
    I have a 09 lsv, I need the rubber gaskets that go in between where the tower bolts to the boat. Can someone point me to where I can buy them. Thanks

    Sent from my SCH-I545 using Tapatalk 4 Beta
    Never heard of you being able to buy them, even the dealer just cuts them to order.

    You best bet is goto Agenda Surf

    http://agendasurf.com/dir/products/b...-set-grey.html

    You can also get Gator grip at Home Depot, i even used a rubber car floor mat for my 08 LSV,

    Remove the old traction pad, use it as a template and cut your self a new one and install it.
    Malo <--- Means--Evil or Mean One. This explains a lot.
    2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
    Exile ZLD
    6 SX65M Cabins
    6 XM9 Towers
    1 XI Big 15 Woofer in a custom Fiberglass box
    1 XI 1K Harpoon
    2 XI 800.4
    1 XI 2500.1
    2 Interstate 2400U 6V Golf Cart Batterties
    Custom 1 Off Evolution Cover

  3. #3
    Join Date
    Jun 2009
    Location
    South West Colorado
    Posts
    356

    Default Tower parts

    I did this same thing last week. I just used the old (factory) swim step pad that was left over from my seadek install a few years ago. It worked great! As mike says, use the old one as a template.
    '08 Mobius LSV, Mods- 1100 lb Rear Sacs, IBS Sac, Center 400 Sac, Dedicated thru-hull intakes and pumps per sac, SeaDek One Piece Mica over Black Roo, EZ Net Cargo Nets, Swivel Drivers Seat, Hot Water Shower, Hinged Wind Block, Bow Cushion Adapter Plate for Drink Holders Access, etc, etc.

  4. #4
    Join Date
    Jul 2008
    Location
    Des Moines, IA
    Posts
    2,589

    Default

    I ordered mine from Atlanta Marine. They were adhesive on one side but still didn't stay in place very well. I will make my own next time and probably epoxy them to the tower base.

  5. #5
    Join Date
    Nov 2010
    Location
    Katy, TX
    Posts
    4,159

    Default

    I bought some for my dealer for like 15 bucks. Lasted about a season and now there are all squashed out haha.
    David

    2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Harpoon, Exile SM600.1 , Exile Xi800.4.

  6. #6
    Join Date
    May 2009
    Location
    Carlton Oregon
    Posts
    6,020

    Default

    Quote Originally Posted by rdlangston13 View Post
    I bought some for my dealer for like 15 bucks. Lasted about a season and now there are all squashed out haha.
    I have to say i was impressed wit the ones i made,

    I used a Dodge truck floor mat and they held up real nice < poke poke >
    Malo <--- Means--Evil or Mean One. This explains a lot.
    2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
    Exile ZLD
    6 SX65M Cabins
    6 XM9 Towers
    1 XI Big 15 Woofer in a custom Fiberglass box
    1 XI 1K Harpoon
    2 XI 800.4
    1 XI 2500.1
    2 Interstate 2400U 6V Golf Cart Batterties
    Custom 1 Off Evolution Cover

  7. #7

    Default Re: Tower parts

    Thanks for the replies. I will probly do the same, just cut up some old floor mats or something like that.

    Sent from my SCH-I545 using Tapatalk 4 Beta
    2009 moomba Mobius lsv

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •