Anyone have any recommendation on a tower mirror for (1-5/8” OD) Rad-A-Cage tower? I have been reading a lot of different post about the tower mirrors, but didn’t see anyone that installed one on the Rad-A-Cage tower. I been looking at Monster Tower mount, but I am unsure about using Universal inserts, “This mount is adjustable to fit any tower with a tubing diameter of 1 ˝” to 2 ˝” and comes with universal inserts”.
Results 1 to 10 of 13
06-10-2013, 02:55 PM #1Member
- Join Date
- Jan 2013
Rad-A-Cage Tower mirror recommendation2007 Moomba Outback V
06-10-2013, 03:49 PM #2
I had the Monster Quick release w/ Extreme mirror on 2 boats and loved it. Quick to take off and avoid bug splats.. The universal inserts worked great.
06-10-2013, 03:53 PM #3
plus 1 on the Monster Tower mirror arm, fits just fine, and it is nice that it has a quick release. I have the CIPA Extreme mirror as well and really like it. I wish I could afford the PTM Edge 140 mirror though.Brian Roberts
2001 Outback DD
06-10-2013, 05:01 PM #4
Brian - do you have the old roll cage style tower on your 2001 or is it the swept back style with 3 contact points or?
I have yet to find a tower mirror arm that would work on my "roll cage" without having the mirror be clear over my head."If your work speaks for itself - don't interrupt"
06-10-2013, 08:23 PM #5
I had a 2003 LSV with factory rad-a-cage tower--Monster tower arm with inserts--worked great, so good I kept it and put it on the 08 LSV. Bummed I could not put it on the 13Hey, Its Moomba time
13 Mobius LSV
08 Mobius LSV-sold
03 Mobius LSV-sold
06-10-2013, 09:49 PM #6
I have the one from Monster. Works Great. Much better than the window mounted one. Gives you clear sight lines when driving and awesome for watching as well.2003 Outback
06-11-2013, 02:17 PM #7
Rad-A-Cage Tower mirror recommendation
I have a CIPA mirror, came with the boat.2008 Supra 21V
1,450 lbs., Gravity III ballast system
Z5 Cargo Rack
Stereo: Pair of Wetsounds Pro 80's, Rockford Fosgate P500-2, Kicker ZX200.4, Exile ZLD, stock Kicker in-cabins, stock Kenwood HU
Tow rig: 2008 Slate Tundra, Bilstein 5100's (F&R)
06-11-2013, 03:18 PM #8
Monster Tower Mirror w/quick release on a 1-5/8 rad-a-cage tower and works great. I too purchased after a thread like this a while back.
I really like the looks of the sampson quick release billet mirror but couldn't justify it at 3 times the price of the Monster Tower mirror. Been happy for the last couple year for sure.2007 Moomba Outback - waiting for summer!
Why Not? Play Hard! Get wet
06-11-2013, 04:38 PM #9Senior Member
- Join Date
- Feb 2009
- Wausau, WI
I had a mount from Bulletlines. It was OK. No quick release. Always had to loosen the clamp, swing the arm to put the tower down. I eventually ditched it. I swithed to a windshild mount, which is now my preferance. No messing with the mirror to lower the tower, and for me I can leave it on all summer. I found less mirror shake/vibrations. Tower is also lighter to swing up and down.Matt
2003 Outback, Assault EFI, (6) Polk Audio DB651s, JL Audio M6600 amp, JL Audio M1700 amp, JL Audio 10w6v2 subwoofer
06-12-2013, 09:24 AM #10Member
- Join Date
- Jan 2013
Matt, you bring up a good point about mirror vibration which I am concerned about. I am 6’ tall, therefore I sit a little higher in the seat and the windshield mounted mirror blocks a good part of my line site. I have to adjust the way I sit and it becomes uncomfortable after a while. I went to place the order on monstertower.com for the tower mounted mirror and CIPA extreme adaptor and canceled out once I saw $30 shipping. I need to find somewhere else to get the monster tower mirror with little or no shipping cost. I just wanted to thank everyone for very helpful advice.2007 Moomba Outback V