Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Join Date
    May 2012
    Location
    Russell Springs Ky, Lake Cumberland/Dale Hollow
    Posts
    95

    Default Digital speed is way off

    Well found out what my problem was on why I could not get ropeless. My digital speed on the boat is 2mph OFF!!!!In order to go 10.4 I have to set the cruise to 8.4 .. as soon as we found out the problem we instantly had 3 people riding ropeless including my 6'3 300 pound friend on a CWB Ride... Made a huge difference.. anyone reading this that is having trouble. GPS your speed! Digital is NOT a surefire way of knowing and made all the difference!!!!
    1995 Moomba Boomerang-SOLD
    2008 Moomba Outback DD- SOLD
    2014 Moomba Mondo
    EXILED and STYLED

  2. #2
    Join Date
    Jul 2010
    Location
    Vicksburg, MI
    Posts
    536

    Default

    You can adjust that by going into the menu of the digital cruise.
    Joe

    2014 LSV
    2010 Outback V - Sold

  3. #3
    Join Date
    Jun 2013
    Location
    Naperville, IL || North Scott Lake, MI
    Posts
    671

    Default

    Is there a best speed to go when calibrating between the GPS and cruise?
    Mike

    2013 Outback V
    2003 SeaRay 182 -- gone but not forgotten...

  4. #4
    Join Date
    Jan 2008
    Location
    Tallahassee, FL
    Posts
    11,301

    Default

    I would think the midpoint of where you normally run so around 15-18 mph for most people.
    My Mom said I'm not allowed to get wet!
    2008 LSV
    2000 Outback LS (sold)
    Exile Tunes
    PWI
    LLTR!!!!!!!!



  5. #5
    Join Date
    Oct 2013
    Location
    Ft. Collins, CO
    Posts
    179

    Default

    Calibrate at the speed you use. If you use a couple of speeds (wake surf and wake board) I would calibrate at the higher speed.
    2007 Mobius LSV
    1989 Sanger Skier DX - sold

  6. #6
    Join Date
    Jul 2010
    Location
    Vicksburg, MI
    Posts
    536

    Default

    I used my phone GPS and calibrated my analog speedometer at 20mph. I then set the offset for the digital to match the analog at 20mph. I am a half mph low at 10mph and a half mph high at 30mph. That is the best I could get.
    Joe

    2014 LSV
    2010 Outback V - Sold

  7. #7

    Default

    I bought and installed the nautilaugic gps speed sensor last week and love it probably the best 235.00 I ve spent on my new boat. I would recommend it to anyone.
    2014 Fire Red Metal Flake LSV
    MMATS and 8" HLCD Audio Formz

  8. #8
    Join Date
    Jun 2013
    Location
    Naperville, IL || North Scott Lake, MI
    Posts
    671

    Default

    Quote Originally Posted by jstenger View Post
    I used my phone GPS and calibrated my analog speedometer at 20mph. I then set the offset for the digital to match the analog at 20mph. I am a half mph low at 10mph and a half mph high at 30mph. That is the best I could get.
    Was there a specific app you used?
    Mike

    2013 Outback V
    2003 SeaRay 182 -- gone but not forgotten...

  9. #9
    Join Date
    Dec 2013
    Location
    MN
    Posts
    15

    Default

    When I bought my mondo I added the GPS. Is yours off with the gps? I just got a call from my dealer to replace a speed control module???? I am having a terrible time getting a good wake to surf. Kind of hoping my speed is off like yours so I can finally get a nice wake!!!
    2014 Mondo

  10. #10
    Join Date
    May 2012
    Location
    Russell Springs Ky, Lake Cumberland/Dale Hollow
    Posts
    95

    Default

    Quote Originally Posted by sioux View Post
    When I bought my mondo I added the GPS. Is yours off with the gps? I just got a call from my dealer to replace a speed control module???? I am having a terrible time getting a good wake to surf. Kind of hoping my speed is off like yours so I can finally get a nice wake!!!
    Sent ya a PM buddy
    1995 Moomba Boomerang-SOLD
    2008 Moomba Outback DD- SOLD
    2014 Moomba Mondo
    EXILED and STYLED

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •