Ok, I need some instalation advice on mounting the ZLD in the Mojo. For you guys that have already done this, how and where did you mount it?
Results 1 to 5 of 5
06-18-2013, 10:22 AM #1
Help with Exile ZLD Instal in 2012 MojoShane
2012 Mojo 2.5
4 XM9 Tower
6 SX65M Cabin
1 XI 800.4
1 XI 1500.1
06-18-2013, 11:05 AM #2
Help with Exile ZLD Instal in 2012 Mojo
I don't have a Mojo but I mounted mine underneath the dash on the right hand side. Used the brackets and built some blocks to help level it out and add strength. Some have cut out the panel on the dash and mounted it there.
Do a search, there's already an older thread that covers this and many people provided their mounting option with pictures.2008 Supra 21V
2,600 lbs., Gravity III
Z5 Cargo Rack
Stereo: Pair of Wetsounds Pro 80's, Rockford Fosgate P500-2, Kicker ZX200.4, Exile ZLD, stock Kicker in-cabins, stock Kenwood HU
Tow rig: 2008 Slate Tundra, Bilstein 5100's (F&R), 295/65/18 wrapped in Duratracs
06-18-2013, 11:09 AM #3
I just removed nuts off the back of the gauges and stuff and added little brackets and stuff till I reached down to the mounts on the sides. Put it all back and voila! That was on an LSV.My Mom said I'm not allowed to get wet!
2000 Outback LS (sold)
06-18-2013, 11:28 AM #4Senior Member
- Join Date
- Jun 2010
- Lake Houston
Re: Help with Exile ZLD Instal in 2012 Mojo
Epoxied erector set pieces.....2013 LSV
2005 LSV - SOLD
06-18-2013, 01:52 PM #5
This is where i mounted mine, on my dash the fiberglass is about 1/2 thick, so i was able to just screw right into the bottom with small screws, it is solid and no vibrations from it.
I ran all the RCAs and wires around the bow, i zip tied them to the existing wires under the lip.
Just pull the bow seats out and stick your head in there, you will see all the wires.
Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >