Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16
  1. #11
    Join Date
    Dec 2006
    Location
    Tigard, Oregon
    Posts
    3,016

    Default

    Quote Originally Posted by squeeg333 View Post
    Hmm, that's interesting. On my LSV is goes out the rear of the ski locker, where the inlet comes in from the back of the boat. I do like that idea of re-routing it thru that opening under the hump. Could be less tight corners that way.
    Squeeg, see the picture below of my boat when I pulled the floor while installing the heater. You can see the fill line and the drain line to the front bag. You would just have to remove the front section of the floor to gain access to the drain hose.

    Al

    2006 Mobius LSV

  2. #12
    Join Date
    May 2012
    Location
    Memphis, TN
    Posts
    51

    Default

    I must say, I have a 2011 21V and just this past weekend out I experienced the same problem. I am not sure what could be causing the block, but I also ohad no luck when trying to empty. I tried the water hose idea, but not the shop vac(probably next), but I was thinking of running a borescope down the hose to check for a blockage. I'm curious to see what I find as the pumps all seemed to work fine and there were no tripped circuits.
    2011 Supra 21V
    2012 Tundra SR5 Crewmax
    Wetsounds Icon8's

  3. #13
    Join Date
    Jan 2008
    Location
    Keuka Lake, NY
    Posts
    5,490

    Default center bag drain problem... i'm stumped

    I thought all boats pre 09 drained the center bag near the driver.
    My obv had only gi so I added the rear ballast and drained them on the rear
    A Day at the Lake...Priceless
    A Day in Powder...Endless


    Joe V
    2012 Möbius XLV~ Loaded & Exiled
    2007 Outback V ~ sold

  4. #14
    Join Date
    Jul 2009
    Location
    Spokane, WA
    Posts
    486

    Default

    Quote Originally Posted by cab13367 View Post
    Squeeg, see the picture below of my boat when I pulled the floor while installing the heater. You can see the fill line and the drain line to the front bag. You would just have to remove the front section of the floor to gain access to the drain hose.

    Al, awesome, thanks man! That's a perfect shot of how that's routed. I assumed it was exactly like this, but a picture is worth at least 5 words!!!

    Real stupid question, but when you put the floor panels back, could you see the screw heads? Right now, mine are mostly covered with the carpet, and I'd like to keep it that way....

    Thanks man
    Last edited by squeeg333; 07-11-2013 at 12:17 PM.
    08 LSV
    Go big, or go home.

  5. #15
    Join Date
    Jan 2008
    Location
    Tallahassee, FL
    Posts
    10,645

    Default

    You just comb the carpet back over them. Part the carpet when you start the screws and then comb it back over when you have them tight. (Leave Dusty's Mom out of that one.)
    My Mom said I'm not allowed to get wet!
    2008 LSV
    Exile Tunes
    PWI
    LLTR!!!!!!!!



  6. #16
    Join Date
    Dec 2006
    Location
    Tigard, Oregon
    Posts
    3,016

    Default

    ^^ What kane said
    Al

    2006 Mobius LSV

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •