Results 1 to 10 of 12

Hybrid View

  1. #1
    Join Date
    Mar 2012
    Location
    ottawa, Canada
    Posts
    40

    Default pictures of reinforced locker walls please

    Ok, I have searched the forums and I understand the importance of reinforcing the locker walls for the 1100lb bags....however i just can't seem to upload the pictures.....I am a visual guy can someone send some pictures for me of the finished product.....
    thx
    2011 LSV

  2. #2
    Join Date
    Nov 2003
    Location
    Land O Lakes, Florida
    Posts
    5,908

    Default

    Hey, Its Moomba time

    13 Mobius LSV
    08 Mobius LSV-sold
    03 Mobius LSV-sold
    life is about finding the balance between being a responsible adult and staying young at heart

  3. #3
    Join Date
    Jan 2008
    Location
    Keuka Lake, NY
    Posts
    5,985

    Default

    I did mine like daze, attached to the door, but instead of doing 4 vertical brackets , I did two "vee" shaped to cover the door with less aluminum.
    A Day at the Lake...Priceless
    A Day in Powder...Endless


    Joe V
    2012 Möbius XLV~ Loaded & Exiled
    2007 Outback V ~ sold

  4. #4
    Join Date
    Apr 2011
    Location
    NY
    Posts
    213

    Default

    Here is mine: IMG_0641[1].jpg
    '06 Outback - Gone but not forgotten
    '13 Mojo

  5. #5
    Join Date
    Mar 2012
    Location
    ottawa, Canada
    Posts
    40

    Default

    I am not very mechanically inclined and it freaks me out drilling holes anywhere near the bottom of the boat...so when i put the bottom bracket on i use 1 inch screws and I will have no problem? do i need to put the bottom bracket o or can i just reinforce wall?
    thx for pics its greatly appreciated!
    2011 LSV

  6. #6
    Join Date
    Sep 2010
    Location
    Lake wallenpaupack PA
    Posts
    846

    Default




    I ended up removing that hinge in the middle and using a L bracket on the motor side so it doesnt push in.

    Its hard enough to work in the motor well so i elected to mount something on the doors and not the aluminum motor frame

  7. #7
    Join Date
    Jun 2012
    Location
    Lake Amistad, TX
    Posts
    564

    Default pictures of reinforced locker walls please

    2004 Outback Blue on White *Sold
    2008 LSV Blue on White
    EXILED with 6 SX65-M in cabin & 2 XM9s rockin the tower
    2 Kicker ZX700.5 Amps powering the entire boat with 2 10" Subs under the dash
    Krypt KMA4200 EQ under driver's side dash to control all the madness
    Z5 Cargo Rack annnnnnnd She's NEKKKKED....

    I'm no expert, I just read up on the Moomba Forum...

  8. #8
    Join Date
    Feb 2010
    Location
    Canton, Ga / Lake Lanier
    Posts
    1,599

    Default pictures of reinforced locker walls please

    Haven't done mine yet and quite frankly I haven't seen the need to yet either...
    SOLD! 2011 Mobius LSV 325HP EFI
    Digital Cruise Pro, Wakeplate, Kenwood KM550U and KCA-RC107MR x2, Kicker ZXM700.5, Kicker 6.5 Cabins, 10'' Kicker CompVT sub, Wetsounds SYN 4, Wetsounds REV10s, Wetsounds WS420Q, Gravity VI Surf Ballast, Acme 537

    Board: '12 LF Harley (Monster) 139
    Her Board: '11 Ronix Krush 128
    Kids Board: '13 Ronix Vision 120
    Skate: LF Faction 44
    Surf: LF Custom Quad & XXX


    Tow Rig:
    2011 Toyota Tundra CrewMax TRD Magnetic Grey
    3/1 Truxx Lift, and some other stuff...

  9. #9
    Join Date
    Jun 2013
    Location
    Lake Orion, MI
    Posts
    432

    Default

    Quote Originally Posted by E4NASH View Post
    Haven't done mine yet and quite frankly I haven't seen the need to yet either...
    Based on E4NASH's similar comment on a previous thread, I chose to try my 1100 bag without reinforcement. I also have not yet seen a need for the reinforcement. However, I did remove the hydraulic lift and bracket on the 1100 side (I have 650 in other side) and I fill that sucker up all the way, the lid is lifted up a couple inches when I'm done filling sometimes lol!

    If you haven't lengthened your fill hose yet (if you have to on a 2011, mine's a 2006), I used stuff from Lowe's to extend my fill hose on both sides; it was $11 for materials and took about 5 minutes to do.
    2006 Mobius LSV
    Previous ride - 2000 Supra Launch

  10. #10
    Join Date
    Jun 2012
    Location
    Lake Amistad, TX
    Posts
    564

    Default pictures of reinforced locker walls please

    Quote Originally Posted by E4NASH View Post
    Haven't done mine yet and quite frankly I haven't seen the need to yet either...
    That's good to know!
    2004 Outback Blue on White *Sold
    2008 LSV Blue on White
    EXILED with 6 SX65-M in cabin & 2 XM9s rockin the tower
    2 Kicker ZX700.5 Amps powering the entire boat with 2 10" Subs under the dash
    Krypt KMA4200 EQ under driver's side dash to control all the madness
    Z5 Cargo Rack annnnnnnd She's NEKKKKED....

    I'm no expert, I just read up on the Moomba Forum...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •