Results 1 to 2 of 2

Hybrid View

  1. #1
    Join Date
    Jun 2012
    Location
    Crosby TX
    Posts
    42

    Default Center ballast empty pump not working.

    I have a 2010 obv with only the center ballast. The problem is it will not empty. The empty pump works when I plug it into the fill plug. When I put my meter on the empty plug and turn it on it shows 12 volts. If I plug the pump in it shows 0 volts when it's turned on. Any help would be greatly appreciated.
    Thanks Rodney

  2. #2
    Join Date
    Jun 2012
    Location
    Crosby TX
    Posts
    42

    Default

    Never mind found it!! The wiring going into the five amp fuse holder was not making a good connection.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •