My perfect pass servo motor needs replacing, but I also want to replace the cable attached to it. I'm guess this is the throttle cable? How hard is it to replace the cable? Want to ask before I ordered everything. Thanks.
Results 1 to 7 of 7
Thread: Perfect Pass cable
07-16-2013, 12:32 AM #1
Perfect Pass cable2005 Moomba Mobius LSV
ACME 1433 prop (newest upgrade)
1900lbs Surf side
07-16-2013, 08:33 AM #2
Well if you are replacing the servo and the cable - I would think it would be as a single unit. Basically PP without the gauge? Or do you plan to keep the original wiring harness? I have never removed a cable from the servo - but the linkage at the carb/throttle is no big deal - a little finicky - but not difficult.If you believe something to be true, it will be - in it's consequences.
2009 MasterCraft ProStar 197 - DD - 5.7L - 325HP - Zero Off
07-16-2013, 12:22 PM #3
You talking the little cable that attaches to the PP servo or the entire throttle cable from up at the helm back?Old enough to know better, young enough to do it anyway.
07-16-2013, 01:21 PM #4Senior Member
- Join Date
- Aug 2011
07-16-2013, 04:05 PM #5
07-16-2013, 04:06 PM #6
07-16-2013, 05:15 PM #7
If I get the chance I'll measure it tonight. If it will fit - you can have it.Old enough to know better, young enough to do it anyway.