Results 1 to 7 of 7
Thread: Perfect Pass cable
07-15-2013, 11:32 PM #1
Perfect Pass cable
My perfect pass servo motor needs replacing, but I also want to replace the cable attached to it. I'm guess this is the throttle cable? How hard is it to replace the cable? Want to ask before I ordered everything. Thanks.2005 Moomba Mobius LSV
ACME 1433 prop (newest upgrade)
1900lbs Surf side
07-16-2013, 07:33 AM #2
Well if you are replacing the servo and the cable - I would think it would be as a single unit. Basically PP without the gauge? Or do you plan to keep the original wiring harness? I have never removed a cable from the servo - but the linkage at the carb/throttle is no big deal - a little finicky - but not difficult.If you believe something to be true, it will be - in it's consequences.
2009 MasterCraft ProStar 197 - DD - 5.7L - 325HP - Zero Off
07-16-2013, 11:22 AM #3
You talking the little cable that attaches to the PP servo or the entire throttle cable from up at the helm back?At the time it seemed like a good idea...
07-16-2013, 12:21 PM #4Senior Member
- Join Date
- Aug 2011
07-16-2013, 03:05 PM #5
07-16-2013, 03:06 PM #6
07-16-2013, 04:15 PM #7
If I get the chance I'll measure it tonight. If it will fit - you can have it.At the time it seemed like a good idea...