Quote Originally Posted by chawk610 View Post
Ordered! How do you get the gauges out? Is there some sort of retainer clip behind?
There are two screw posts on the back of each gauge. There is a retaining bracket that the screw post go through and are held down with a tiny nut and washer. Unscrew the nut and washer and the "bracket" will be able to be removed then just pull out the gauge. I did it by hand but would recommend a small socket or wrench because some of those screws were pretty tight. I had a set of wire strippers for another project I was doing and had to use them to try and free up the nut. You will also need pliers to turn the plastic plug to get the bulb out.

Sent from my iPhone using Tapatalk 2