Page 3 of 5 FirstFirst 12345 LastLast
Results 21 to 30 of 42
  1. #21
    Join Date
    Feb 2010
    Location
    Canton, Ga / Lake Lanier
    Posts
    1,590

    Default Quick and cheap mod!

    Quote Originally Posted by chawk610 View Post
    Ordered! How do you get the gauges out? Is there some sort of retainer clip behind?
    There are two screw posts on the back of each gauge. There is a retaining bracket that the screw post go through and are held down with a tiny nut and washer. Unscrew the nut and washer and the "bracket" will be able to be removed then just pull out the gauge. I did it by hand but would recommend a small socket or wrench because some of those screws were pretty tight. I had a set of wire strippers for another project I was doing and had to use them to try and free up the nut. You will also need pliers to turn the plastic plug to get the bulb out.


    Sent from my iPhone using Tapatalk 2
    SOLD! 2011 Mobius LSV 325HP EFI
    Digital Cruise Pro, Wakeplate, Kenwood KM550U and KCA-RC107MR x2, Kicker ZXM700.5, Kicker 6.5 Cabins, 10'' Kicker CompVT sub, Wetsounds SYN 4, Wetsounds REV10s, Wetsounds WS420Q, Gravity VI Surf Ballast, Acme 537

    Board: '12 LF Harley (Monster) 139
    Her Board: '11 Ronix Krush 128
    Kids Board: '13 Ronix Vision 120
    Skate: LF Faction 44
    Surf: LF Custom Quad & XXX


    Tow Rig:
    2011 Toyota Tundra CrewMax TRD Magnetic Grey
    3/1 Truxx Lift, and some other stuff...

  2. #22
    Join Date
    May 2011
    Location
    Fort Worth
    Posts
    1,415

    Default

    Very cool... thank you!
    '08 Mobius LS

  3. #23
    Join Date
    Jun 2007
    Location
    Rice Lake, Ontario
    Posts
    573

    Default

    would an 06 LSV use the same lights?
    2006 Moomba Mobius LSV
    Lake: Rice lake, Ontario
    Stereo: Kenwood KMR-550U
    Ballast: 750 Surfside locker, 400 Surfside mid boat, 400 Gravity I, 400 Bow
    Surfboards: Inland Surfer Red Woody, Triple X Composite X 58"

    If you're from the area and want to surf, send me a PM!

  4. #24
    Join Date
    Feb 2010
    Location
    Canton, Ga / Lake Lanier
    Posts
    1,590

    Default

    Yes, the '06 LSV would use the same lights. I think it will only use one perlight instead of how the '08 and up uses two for the two big gauges.
    SOLD! 2011 Mobius LSV 325HP EFI
    Digital Cruise Pro, Wakeplate, Kenwood KM550U and KCA-RC107MR x2, Kicker ZXM700.5, Kicker 6.5 Cabins, 10'' Kicker CompVT sub, Wetsounds SYN 4, Wetsounds REV10s, Wetsounds WS420Q, Gravity VI Surf Ballast, Acme 537

    Board: '12 LF Harley (Monster) 139
    Her Board: '11 Ronix Krush 128
    Kids Board: '13 Ronix Vision 120
    Skate: LF Faction 44
    Surf: LF Custom Quad & XXX


    Tow Rig:
    2011 Toyota Tundra CrewMax TRD Magnetic Grey
    3/1 Truxx Lift, and some other stuff...

  5. #25
    Join Date
    Jul 2010
    Location
    Dickinson, ND
    Posts
    132

    Default

    yeh it should be the same as my 07 xlv, just one bulb per gauge
    07 Gravity Games Edition XLV
    -EXiled Out System Amps,Sub,Speakers,etc.. Gravity III Ballast, Blue Leds Throughtout boat, still more to come!

    02 Moomba LSV "SOLD"

    Tow Rig-12' F150 Ecoboost-leveled/intake

  6. #26
    Join Date
    Jun 2007
    Location
    Rice Lake, Ontario
    Posts
    573

    Default

    Quote Originally Posted by powerstroke99 View Post
    To replace them just takes a lil body flexing and going underneath dash to twist out lil black tab remove bulb, insert new led and good to go.. if it does'nt light up just have to rotate bulb in fitting to get correct + and - .. hardest one i thought was the trim gauge for wake plate

    heres exact ones i bought, well got free using ebay bucks

    http://www.ebay.com/itm/20X-T10-194-...1f7e26&vxp=mtr
    how did the price of this go up to $60?
    2006 Moomba Mobius LSV
    Lake: Rice lake, Ontario
    Stereo: Kenwood KMR-550U
    Ballast: 750 Surfside locker, 400 Surfside mid boat, 400 Gravity I, 400 Bow
    Surfboards: Inland Surfer Red Woody, Triple X Composite X 58"

    If you're from the area and want to surf, send me a PM!

  7. #27
    Join Date
    Jun 2013
    Location
    Naperville, IL || North Scott Lake, MI
    Posts
    632

    Default

    Quote Originally Posted by spyder View Post
    how did the price of this go up to $60?
    Must have seen everybody from this forum scooping up all the inventory and deciding his price was too low!!

    If you only need 8 like everyone else, I could certainly part with some of mine which I will probably never use anyplace else -- send me a PM and we can probably work something out...
    2013 Outback V
    2003 SeaRay 182 -- gone but not forgotten...

  8. #28
    Join Date
    Jun 2007
    Location
    Rice Lake, Ontario
    Posts
    573

    Default

    2006 Moomba Mobius LSV
    Lake: Rice lake, Ontario
    Stereo: Kenwood KMR-550U
    Ballast: 750 Surfside locker, 400 Surfside mid boat, 400 Gravity I, 400 Bow
    Surfboards: Inland Surfer Red Woody, Triple X Composite X 58"

    If you're from the area and want to surf, send me a PM!

  9. #29
    Join Date
    Feb 2010
    Location
    Canton, Ga / Lake Lanier
    Posts
    1,590

    Default Quick and cheap mod!

    Quote Originally Posted by spyder View Post
    how did the price of this go up to $60?
    WOW! These are most certainly NOT worth $60. I had one or 2 that didn't even work. They were priced right at $11. I have some extras too if someone wants them.
    SOLD! 2011 Mobius LSV 325HP EFI
    Digital Cruise Pro, Wakeplate, Kenwood KM550U and KCA-RC107MR x2, Kicker ZXM700.5, Kicker 6.5 Cabins, 10'' Kicker CompVT sub, Wetsounds SYN 4, Wetsounds REV10s, Wetsounds WS420Q, Gravity VI Surf Ballast, Acme 537

    Board: '12 LF Harley (Monster) 139
    Her Board: '11 Ronix Krush 128
    Kids Board: '13 Ronix Vision 120
    Skate: LF Faction 44
    Surf: LF Custom Quad & XXX


    Tow Rig:
    2011 Toyota Tundra CrewMax TRD Magnetic Grey
    3/1 Truxx Lift, and some other stuff...

  10. #30
    Join Date
    Feb 2013
    Location
    Norcross, GA & Lake Lanier
    Posts
    219

    Default Re: Quick and cheap mod!

    You can easily find 10 for $10.. they come in 3 different quality NOT sure what they are selling....

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •