Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 22
  1. #11
    Join Date
    Feb 2014
    Location
    Martinsville, Indiana
    Posts
    28

    Default

    From what I have found the Monster racks fit the larger diameter towers. I would need a pretty big rubber shim to make them work. The pic of the OBV above looks like it has the roswell racks. Those are rediculously expensive unless someone has a used set. I must have mentioned I am not made of money. Ha!
    First Moomba!
    2009 Outback V 325

  2. #12
    Join Date
    Jan 2008
    Location
    colorado
    Posts
    687

    Default

    I will post my swivel racks in classifieds. don't want to hijack this thread.

    But, i think the bracket is about 2.5" and better fits the larger diameter tower. they may have shims that would reduce to the smaller diameter.
    08 LSV

  3. #13
    Join Date
    May 2011
    Location
    Fort Worth
    Posts
    1,415

    Default

    Have a look see here. I have an '08 so I used 1/8" rubber shims to make mine fit. 2 years later they are still solid as a rock. + bonus Newty shot
    Newty on the boat.jpg
    '08 Mobius LS

  4. #14
    Join Date
    Aug 2011
    Posts
    1,095

    Default Re: Swivel Racks on a Rad A Cage Tower

    Yep,

    I had the smaller diameter on my 02 but they don't fit my new 06 tower.. I'll take the 2.5, those are the blem units from monster..





    Sent from my Nexus 5 using Tapatalk
    2002 Moomba Mobius LSV - Sold
    2006 Moomba Mobius LSV

  5. #15
    Join Date
    May 2011
    Location
    Fort Worth
    Posts
    1,415

    Default

    Yes they are. They work really well though. Look pretty darn good too.
    '08 Mobius LS

  6. #16
    Join Date
    Aug 2011
    Posts
    1,095

    Default Re: Swivel Racks on a Rad A Cage Tower

    The paint was fading on mine after 1 season...

    Sent from my Nexus 5 using Tapatalk
    2002 Moomba Mobius LSV - Sold
    2006 Moomba Mobius LSV

  7. #17
    Join Date
    Feb 2014
    Location
    Martinsville, Indiana
    Posts
    28

    Default

    Is everyone in agreement that 1 5/8" to 2 1/5" is too much of a difference? Also, back to original question...anyone know of any that are a good value?
    First Moomba!
    2009 Outback V 325

  8. #18
    Join Date
    Aug 2011
    Posts
    1,095

    Default Re: Swivel Racks on a Rad A Cage Tower

    It all depends on the shim, with mine I had one just right, the other moved all the time. Those were the smaller ones, you'd have to experiment and see if it works. If you don't take them I will since they're 2.5.

    Sent from my Nexus 5 using Tapatalk
    2002 Moomba Mobius LSV - Sold
    2006 Moomba Mobius LSV

  9. #19
    Join Date
    Jan 2008
    Location
    colorado
    Posts
    687

    Default

    I posted my swivel racks in classifieds.
    08 LSV

  10. #20
    Join Date
    Feb 2014
    Location
    Martinsville, Indiana
    Posts
    28

    Default

    parrothd go ahead bud. I just wish there was something out there a little closer to the correct size. Looks like I can hit it right on if I spend 300/rack.
    First Moomba!
    2009 Outback V 325

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •