I have a 2000 Mobius V, and need a new/used trailor. Besides the 22' length,
what am I looking for in a trailor that will fit my boat?
Results 1 to 10 of 11
Thread: Trailor specs
07-30-2013, 05:59 PM #1Junior Member
- Join Date
- Apr 2004
- Jax, FL
07-30-2013, 06:17 PM #2
Go with a tandem axle - for sure, no exception. 14" wheels or better. At least brakes on the front axle.
My stock springs were rated for 1500lb capacity each, but I recently swapped them for 1700lb each, just because that was what was available at the time I broke one.
Mine has the bunks a bit offset from one another like this:
Here's a few more so you can see the front bow stop, etc.
A swing away tongue would be nice for tight storage spaces but if you don't need it you can save some coin.
Guide poles are a must.
You'll also want to make sure the bunks are high enough, or can be shimmed, for prop clearance.
For weight specifications if I recall dry weight on the boat is 3200lbs, but add all your gear, fuel, etc, and you'll be a LOT heavier.2001 MobiusV
07-30-2013, 06:23 PM #3
And for the rear bunks positioning the shape of the hull will help with self aligning when you are pulling out of the water. This hull has sort of a notch that the bunks fit nicely on either side of.
That helpful at all?2001 MobiusV
07-30-2013, 06:24 PM #4
With that weight you have to have brakes on at least one axle, I believe, in FL.My Mom said I'm not allowed to get wet!
07-30-2013, 06:41 PM #5
In your first pic i don't see the bunks offset ,all i see is a bent skeg .2012 Mobius LSV
05 OUTBACK LS FOR SALE
07-30-2013, 07:34 PM #6
Nice huh... That one left a mark.
The front bunks are spaced narrower with the shape of the hull.2001 MobiusV
07-31-2013, 12:33 AM #7Member
- Join Date
- Mar 2013
- Orillia, Ontario< Canada
07-31-2013, 11:20 AM #8
Here's a link to that build thread:
http://www.moomba.com/msgboard/showt...=trailer+buildMy Mom said I'm not allowed to get wet!