So I decided to jump in with a fairly easy mod and do the cooler removal. I had read a few times about cutting it out and ordering an AO cooler that is soft sided that will fit right in. I didn't have a dremel tool so I decided to try an angle grinder I had. Probably not the best tool but worked ok. Toughest part was getting the blade into the corners. I tried to keep a shop vac going while working but still gets pretty messy.
Results 1 to 10 of 23
Thread: My first mod...Cooler removal
09-13-2013, 04:03 PM #1
My first mod...Cooler removalScott
2007 Mobius LSV with a lot of great upgrades and mods