And now for my latest mod.... Runway lights!!!!!!!!
I got this idea from a cool writeup on Wakeworld.
Here's what you need:
- 5 meters of black 5050 SMD waterproof strip lights, Mine light up BLUE
- Atwood Digital Bilge Switch (Amazon.com had the best price)
- A bunch of black zip ties
So, 5 meters was enough to go from the rear of the trailer most of the way towards the front. Close enough that I didn't feel compelled to waste more money on lights. I paid $26 shipped off ebay from a seller called nj-store.
This switch will power the lights on for 8 seconds when you first turn on the running lights. Just a power up test it always does. Once the sensors are wet for 8 seconds, then the lights will illuminate. The switch will keep the lights powered up for 1 minute after the sensors are out of the water. There are no moving parts on this switch so it won't trigger the lights going down the road on bumps.
Okay, so I just ran the strip lights down the top of my frame rails of my trailer. I tapped into my running light circuit of my trailer lights, ran a wire across to the other side to power those strip lights, and secured the strip lights about every 3 to 4 feet with zip ties around the frame rails. Yes, they have adhesive, but it's weak and I don't trust it so I zip tied the strip lights in place.
Results 1 to 10 of 33
09-26-2013, 12:44 PM #1
LED Trailer Runway lights on a digital bilge switch.1992 Supra Sunsport. PCM 351 Pro Boss, Tower, Auto Ballast, Heater, Perfect Pass Wakeboard Pro, Bimini, Sunbrella Cover, Low Pitch Prop, Dual Batteries, LED's, MB Quart speakers, Rockford Fosgate Amps, Phoenix Gold Sub, 8" Compression Horn Tubbies, Light bar, a TON of blue LED's, Fly High fat sacks, homemade surf system
Tow Rig: 2009 Honda Ridgeline RTL (wife's rig) Other money pits include:1998 BMW M3 Cabriolet, 2000 Jeep Wrangler rock crawler), 1999 Audi A6 Avant, 2005 Kawasaki ZX-6R 636.