Results 1 to 10 of 11

Thread: Snap covers

Hybrid View

  1. #1
    Join Date
    Jan 2009
    Location
    Calgary, Alberta
    Posts
    21

    Default Snap covers

    I know there have been lots of posts and discussions around travel covers and mooring covers. I've read them all and they've provided great information. I'm currently running a Rankin travel cover on my 2004 XLV and I'm really happy with it.

    However, the marina we moor at for our vacations only has access to one side of the boat while in the slip. While the Rankin is a great travel cover, it's a PITA to use as a mooring cover. We faithfully cover the boat every night, so it's rock/paper/scissors on who gets the dreaded task of covering the boat.

    Based on that, I was thinking about getting the 2-piece snap cover (for the bow and cockpit) to use for the night time covering. That would mean drilling a ton of holes for snaps, but it sure would be easier for covering while in the slip as well as covering the bow for those cooler mornings.

    I would like to know what folks think about ordering a snap cover from Skiers Choice (if it's even available), having a local shop do it (I'm in Western Canada), or if anyone knows of a shop that might already have the template -which means I could purchase it and then apply snaps myself.

    I appreciate any thoughts or comments.
    2004 XLV - 340 HP

  2. #2
    Join Date
    Jan 2008
    Location
    Pensacola, FL
    Posts
    1,544

    Default

    I sold my one piece cover and had a local shop do the 2 piece snap on. Whoa, it made the covering of the boat so much better. I highly recommend the snap on cover. Plus, you can leave the bow on when it's cooler or when you don't need to use the bow.

    If you have a local person do it, have them put the snaps down on the sides. If they are too near the top, ropes, fingers, and feet can snag on them. I had a problem with the ski rope getting worn on the rear side snap because it was too high on the side.
    1997 MasterCraft 205

    2008 Moomba Outback
    1999 MasterCraft Sportstar OB
    1992 MasterCraft 205
    1999 Malibu Response LX
    1987 Marlin Magnum Skier

  3. #3
    Join Date
    Nov 2009
    Location
    Kaukauna, WI - 3minutes from glass
    Posts
    1,763

    Default

    I have decided that in my next boat I am going to do a snap cover but here is the kicker... Its going to be a full custom cover that snaps under the rub rail because I hate the way snaps destroy the clean look of the boat. You will still be able to cover it from the inside but it will still look great.
    -Mark
    14 Mojo - Waiting patiently for my build date.
    02 Mobius LSV ---- Sold and always will be remembered as the one that started it all.

    "Hey you only live once"

  4. #4
    Join Date
    May 2010
    Location
    Salt Lake City, Utah
    Posts
    403

    Default

    I have had a couple of snap covers made for my old boats over the years, all by local companies and they were great. They have all fit really nice and tight and are great for towing. I would like to have one made for the lsv i just bought but can't bring myself to put snaps on a nice clean boat that doesn't already have them.
    Scott
    2007 Mobius LSV with a lot of great upgrades and mods

  5. #5
    Join Date
    Jan 2009
    Location
    Calgary, Alberta
    Posts
    21

    Default

    Thanks everyone! I think the best route will be to source out a local shop and have them do it from scratch. Guaranteed good fit then! I appreciate the response and opinions.
    2004 XLV - 340 HP

  6. #6
    Join Date
    Jun 2008
    Location
    De Pere WI
    Posts
    4,226

    Default

    had a snap cover on the supra and compared to the ratchet towing cover I have on current boat, it was 100% easier to use, but I wouldn't want to tow with it. I didn't mind the look of the snaps however did have a few of them break/tear at the 4-5year mark on the cover. the couple times I had to put it on at the dock, it was a snap(haha)..

    if you make it from scratch, pony up the extra cash for a quality fabric and if it was me, reinforce the snap points with some extra fabric. the rear ones are where mine started to tear out..
    '06 Supra Launch 20SSV-gone but never forgotten

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •