Page 8 of 11 FirstFirst ... 678910 ... LastLast
Results 71 to 80 of 101
  1. #71
    Join Date
    Jan 2008
    Location
    Tallahassee, FL
    Posts
    11,347

    Default

    That's quite a bit of beer. Way to stay after it.
    My Mom said I'm not allowed to get wet!
    2008 LSV
    2000 Outback LS (sold)
    Exile Tunes
    PWI
    LLTR!!!!!!!!



  2. #72
    Join Date
    Feb 2008
    Location
    Traverse City, MI
    Posts
    2,408

    Default Winter Projects List - Lets See Em!

    I finally got to spend some quality time with the boat to get some projects under way! Because I'm planning to put the 6V batteries in the rear engine hatch area (not quite sure exactly where yet) I wanted to get the lockers done - so I ripped out the carpet and started scraping the glue - what a joyous job that is! I took photos of that process, but they don't look like anything - photographing black fiberglass in a dimly lit warehouse, go figure!

    A while back I ordered a large (47" x 86") sheet of gray cut groove Hydroturf with adhesive backing - I was pleasantly surprised that the material is very similar to the feel of SeaDek, but a bit cheaper.

    So I brought the carpet home and used it as a template to cut the Hydroturf - hoping to get to the boat tomorrow or Monday to test fit and possibly install. Next up will be batteries and ProSport!


    edit: Not sure if Dropbox links are working, so also uploaded to the (terribly quality) Tapatalk...
    The carpet "template" on top of the sheet of Hydroturf;




    Rather than draw on the product itself I chose to put tape around the perimeter of the carpet, then draw on the tape - this way I don't have any black lines to wash out;


    Last edited by ian ashton; 01-25-2014 at 09:20 PM.

  3. #73
    Join Date
    Feb 2008
    Location
    Traverse City, MI
    Posts
    2,408

    Default

    Man the photo hosting limitations here are really bad, what the heck happened?

  4. #74
    Join Date
    Feb 2008
    Location
    Traverse City, MI
    Posts
    2,408

    Default

    image.jpgDirect upload to the site any better than Tapatalk?
    Last edited by ian ashton; 01-25-2014 at 09:28 PM.

  5. #75
    Join Date
    Feb 2008
    Location
    Traverse City, MI
    Posts
    2,408

    Default Winter Projects List - Lets See Em!

    Another test;

  6. #76
    Join Date
    Mar 2010
    Location
    Irondequoit Bay, NY
    Posts
    1,299

    Default

    redo the distro boxes on amp rack
    rewire the amp rack
    maybe do a new amp rack
    would like to do:
    carpet
    sea dek in the bow walkway
    new drivers seat and vinyl for the rest of the boat
    another set of xm7's or 9's( i know i dont have the coin for this )
    led lighting in the boat
    replace the rockford amp with a javi
    Last edited by motosno963; 01-26-2014 at 03:21 AM.
    2004 Outback Blue/white w/5.7 indmar 350, Direct Drive
    Rockford fasgate cabins
    Rockford fasgate 500w amp (cabin) and a kenwood HU (kmr700u)
    Exile XM7's
    Exile Harpoon
    Exile ZLD
    Polk 10in sub (2)
    Polk P330 amp (subs)

  7. #77
    Join Date
    Jun 2012
    Location
    Unhappy about our NorCal Lake Levels!
    Posts
    516

    Default

    Two new sets of WS XS-808 in-boats to go with the existing in boat XS-650s, Two new W6-12s and a whole slew of new Arc Audio amps, rewire the tower with WS wires for the RGBs because I had to buy a new Sampson tower. Of course with all the new amps, I am upping the size of the power cabling and adding some more RGBs and a second controller.

    At least I now have a bunch of stereo components for my pontoon boat.

    Powder coating the windshield frame to match the new tower and of course the Icon8 housings.

    I blame you guys and this website for continually feeding my upgraditis affliction!!
    Last edited by EricU; 01-27-2014 at 12:24 AM.
    Sent by the random thoughts from the voices in my head...

    Eric.

  8. #78

    Default

    Still using it. Heated garage and nuclear reactor heated lake. But for the really cold month, replace tower speakers, maybe send the back seat out for new upholstry, fresh air exhaust, wetsounds equalizer/fader/sub control.
    Goode Nano Mid Ride and Powershell 5 Boots
    HO A-1
    Ronix Parks Bonifay and Hyperlite Bindings
    Liquid Force Watson and Watson Bindings
    Liquid Force 5.0 Surf

  9. #79
    Join Date
    Jul 2010
    Location
    Vicksburg, MI
    Posts
    554

    Default

    Quote Originally Posted by ian ashton View Post
    Yea, I'm adding a pair of SXT9s to the pair of XM9s that I have. I figure running separate amps will give me the ability to dial in gains more closely and control volume independently between the pairs.
    Any progress on your SXT9 install? Curious to see how the four speakers look on the tower.
    Joe

    2014 LSV
    2010 Outback V - Sold

  10. #80
    Join Date
    Jun 2013
    Location
    San Antonio/Marble Falls
    Posts
    25

    Default Winter Projects List - Lets See Em!

    Quote Originally Posted by jstenger View Post
    Any progress on your SXT9 install? Curious to see how the four speakers look on the tower.
    I just put 4 SXT9s on my tower. I think they look pretty good.




    Edit: you guys are right about tapatalk picture quality. Blah.

    Sent from my iPhone using Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •