Results 1 to 7 of 7
  1. #1
    Join Date
    Nov 2003
    Location
    Land O Lakes, Florida
    Posts
    5,889

    Default Battery cable question

    Im thinking of relocating my batterys and would need to get a longer positive and negative cable, where can i purchase the cable with cable ends all ready attatched ?
    Hey, Its Moomba time

    13 Mobius LSV
    08 Mobius LSV-sold
    03 Mobius LSV-sold
    life is about finding the balance between being a responsible adult and staying young at heart

  2. #2
    Join Date
    Jul 2008
    Location
    Des Moines, IA
    Posts
    2,613

    Default Battery cable question

    I got mine online from a place recommended by Razzman I think. I will see info can dig up the name.

    Edit: http://stores.ebay.com/Genuinedealz?_rdc=1&afsrc=1
    Last edited by brain_rinse; 10-30-2013 at 08:51 AM.

  3. #3
    Join Date
    Jun 2008
    Location
    De Pere WI
    Posts
    4,218

    Default

    if you don't find anything else, I bought bulk cable from Knukonceptz online and took it to the local interstate battery dealer. they put ends on for $3 each. enabled me to cut the cable to the exact length needed and then get the ends put on. I really like their cable and price seemed to be good.
    '06 Supra Launch 20SSV-gone but never forgotten

  4. #4
    Join Date
    Jun 2007
    Location
    Vancouver, WA
    Posts
    4,191

    Default

    A local battery shop could do it like SandM says. When I relocated I had to buy a bunch of new/heavier cable and price-wise the local battery shop was pretty close to what I could find on-line per ft. Kinda like to support the small local guys when I can and always nice to walk in and walk out a few min later with it in your hands ready to go. Pretty sure welding cable and battery cable are interchangeable when you get to the heavy gauge but they could give you the lowdown.
    Old enough to know better, young enough to do it anyway.

    2001 MobiusV

  5. #5
    Join Date
    Oct 2010
    Location
    Lake Wylie NC Area
    Posts
    840

    Default

    Quote Originally Posted by sandm View Post
    if you don't find anything else, I bought bulk cable from Knukonceptz online and took it to the local interstate battery dealer. they put ends on for $3 each. enabled me to cut the cable to the exact length needed and then get the ends put on. I really like their cable and price seemed to be good.
    This is really the best solution. Its very hard to accurately measure what a cable length light be once its laid in place, anchored down and connected to the battery. If your estimate is short, you're out the expense. If its long, then you have some thick heavy cable slack to put somewhere. Over estimate and buy the cable and ends. Then lay the cable in, cut and then attach the ends.

  6. #6
    Join Date
    Aug 2012
    Location
    I live in Bostic, NC. I normally boat on lake James in Marion, NC
    Posts
    107

    Default

    you can also check out Sky High aduio cabel. you can also get 2/0 from them youll have to make your own connections but its nice wire
    2011 Xlv with 325hp and stock Gravity lll

  7. #7
    Join Date
    Jan 2008
    Location
    Keuka Lake, NY
    Posts
    5,964

    Default

    http://www.ebay.com/sch/i.html?_trks...at=0&_from=R40

    Plenty on here for cheap , take to napa or interstate and get ends or do what the guys above suggest, buy cable and ends local.
    A Day at the Lake...Priceless
    A Day in Powder...Endless


    Joe V
    2012 Möbius XLV~ Loaded & Exiled
    2007 Outback V ~ sold

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •