Page 1 of 2 12 LastLast
Results 1 to 10 of 20
  1. #1
    Join Date
    Aug 2011
    Posts
    1,116

    Default Outback V Rear Side Hatch Hinges +06 Models...

    Could someone with a newer Outback V (2006+) that has the 3 section rear sunpad provide their dimensions? Maybe take a picture of what they look like? There should be 2 on each side..

    I'm looking to convert my rear sunpad from a single one to a three door version but need to find the hinges.
    2002 Moomba Mobius LSV - Sold
    2006 Moomba Mobius LSV

  2. #2
    Join Date
    Jun 2008
    Location
    Eugene OR
    Posts
    1,712

    Default

    I have a 08 OBV and will try to make it out to my storage unit in the next few days to get some dimensions for you unless someone gets to it first.
    2008 Outback V
    “Do not wait; the time will never be “just right.” Start where you stand, and work with whatever tools you may have at your command, and better tools will be found as you go along." -Napoleon Hill

  3. #3
    Join Date
    Aug 2011
    Posts
    1,116

    Default

    Thanks !

    Sent from my Nexus 5 using Tapatalk
    2002 Moomba Mobius LSV - Sold
    2006 Moomba Mobius LSV

  4. #4
    Join Date
    Jun 2012
    Location
    Portland Oregon
    Posts
    825

    Default Outback V Rear Side Hatch Hinges +06 Models...

    Not the right year or model but here you go:



    -Jake

  5. #5
    Join Date
    Jun 2012
    Location
    Portland Oregon
    Posts
    825

    Default Outback V Rear Side Hatch Hinges +06 Models...


    -Jake

  6. #6
    Join Date
    Aug 2011
    Posts
    1,116

    Default Re: Outback V Rear Side Hatch Hinges +06 Models...

    Thanks, those are too tall for the older lsv, hoping the outback has shorter ones, closer to an 1in 1/2..

    Sent from my Nexus 5 using Tapatalk
    2002 Moomba Mobius LSV - Sold
    2006 Moomba Mobius LSV

  7. #7
    Join Date
    Jun 2007
    Location
    Vancouver, WA
    Posts
    4,186

    Default

    Really? I'm surprised. I would think they're all very close on height from the support lip up to the edge... (the height of the cushion)
    Old enough to know better, young enough to do it anyway.

    2001 MobiusV

  8. #8
    Join Date
    Aug 2011
    Posts
    1,116

    Default

    I was hoping so.. The lsv cushion is 2.5± inches tall, with 1in exposed when closed on the sides..The Möbius v cushion appears to be flush..

    Sent from my Nexus 5 using Tapatalk
    2002 Moomba Mobius LSV - Sold
    2006 Moomba Mobius LSV

  9. #9
    Join Date
    Jun 2007
    Location
    Vancouver, WA
    Posts
    4,186

    Default

    Yes - was pretty much flush. Mine stick up a bit now though.

    Try Great Lakes Skipper. I bet you'll find something that will work. Search for "offset piano hinge" or similar but be prepared to burn a couple hours comparing options. They do show some good measurements and multiple pics though. I tried a powder coated white hinge first but couldn't make it work - for $20 I figured it was worth a shot.

    I would have been willing to just go with an aluminum hinge and either paint it white or even plastidip it. If you wrap it with vinyl when installing you'll rarely see much of it anyway.
    Old enough to know better, young enough to do it anyway.

    2001 MobiusV

  10. #10
    Join Date
    Jun 2012
    Location
    Portland Oregon
    Posts
    825

    Default Outback V Rear Side Hatch Hinges +06 Models...

    -Jake

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •