Page 2 of 2 FirstFirst 12
Results 11 to 20 of 20
  1. #11
    Join Date
    Aug 2011
    Posts
    1,025

    Default Re: Outback V Rear Side Hatch Hinges +06 Models...

    That's a different boat..

    Sent from my Nexus 5 using Tapatalk
    2002 Moomba Mobius LSV - Sold
    2006 Moomba Mobius LSV

  2. #12
    Join Date
    Jun 2007
    Location
    Vancouver, WA
    Posts
    3,943

    Default

    Close to your dimensions - but not cheap...
    http://greatlakesskipper.com/powerqu...t-hinge-single

    I'd suggest contacting Jon at SC directly - ask for the part number and dimensions of the hinge(s) for a 2006 OBV. Then contact your favorite SC dealer and have them order it. Will save you a lot of time. Not money necessarily, but time.
    Old enough to know better, young enough to do it anyway.

    2001 MobiusV

  3. #13
    Join Date
    Aug 2011
    Posts
    1,025

    Default Re: Outback V Rear Side Hatch Hinges +06 Models...

    Email sent..

    Probably just use a piano hinge and add some mounting hardware to the cushion then I can mount it anyway I need to..




    Sent from my Nexus 5 using Tapatalk
    2002 Moomba Mobius LSV - Sold
    2006 Moomba Mobius LSV

  4. #14
    Join Date
    Jun 2008
    Location
    Eugene OR
    Posts
    1,695

    Default

    Ok I have photos for you. Sorry it took so long.

    First is looking back the width of the left hatch.



    Width of engine hatch.



    Width of right hatch. (Port side)





    Hings on the left and right compartments. Front and back are the same size

    2008 Outback V
    “Do not wait; the time will never be “just right.” Start where you stand, and work with whatever tools you may have at your command, and better tools will be found as you go along." -Napoleon Hill

  5. #15
    Join Date
    Jun 2008
    Location
    Eugene OR
    Posts
    1,695

    Default








    2008 Outback V
    “Do not wait; the time will never be “just right.” Start where you stand, and work with whatever tools you may have at your command, and better tools will be found as you go along." -Napoleon Hill

  6. #16
    Join Date
    Jun 2008
    Location
    Eugene OR
    Posts
    1,695

    Default

    Now the engine hatch.










    Both sides of the engine hatch are the same. Hope these help.
    2008 Outback V
    “Do not wait; the time will never be “just right.” Start where you stand, and work with whatever tools you may have at your command, and better tools will be found as you go along." -Napoleon Hill

  7. #17
    Join Date
    Aug 2011
    Posts
    1,025

    Default

    Great! Thanks...

    This is the measurement I really needed...It looks to be around an 1in, thanks!

    20131113_150238.jpg
    2002 Moomba Mobius LSV - Sold
    2006 Moomba Mobius LSV

  8. #18
    Join Date
    Aug 2011
    Posts
    1,025

    Default

    Get an email back from Skiers Choice, should be 100589...

    Thanks all!

    That look like a hinge used on the 2008 Outback V. Part number 100589 Hinge Z ship 1” H x 3”.
    2002 Moomba Mobius LSV - Sold
    2006 Moomba Mobius LSV

  9. #19
    Join Date
    Jun 2008
    Location
    Eugene OR
    Posts
    1,695

    Default

    So the one image I did not take with a reading is the one you needed. Always happens that way. I say it does look like one inch. If you need it I can get back out there tonight to get it for you.
    2008 Outback V
    “Do not wait; the time will never be “just right.” Start where you stand, and work with whatever tools you may have at your command, and better tools will be found as you go along." -Napoleon Hill

  10. #20
    Join Date
    Aug 2011
    Posts
    1,025

    Default

    No worries, that was good enough!.. Thanks!
    2002 Moomba Mobius LSV - Sold
    2006 Moomba Mobius LSV

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •