Results 1 to 3 of 3

Hybrid View

  1. #1
    Join Date
    Jun 2008
    Location
    NOR-CAL
    Posts
    177

    Default Steering clamp block

    I know a few of us had "loose" steering issues. I found what I thought
    was a loose part at the tilt steering.
    I also looked back at the steering clamp block by the engine. it had quit a bit of play. I think that might be a problem...........My boat is in storage and I need to know if it has a 2 5/8 inch shaft or 4 7/8 inch shaft.

    This part seems to hold the steering cable in place against the stringer, But it has a ball joint at the end that could wear out.

    Any of you guys kow if the shaft length is 2 5/8 or 4 7/8???

    the shaft lenght is how far it holds it away from the stringer......I was hoping to buy one before pulling out the boat.

    Thanks and Happy New Year
    07 LSV usually DUMPED

  2. #2
    Join Date
    Nov 2010
    Location
    Katy, TX
    Posts
    3,949

    Default Steering clamp block

    I have no idea what the size of that part is but let me know if it fixes the loose steering!


    Sent from my iPhone
    David

    2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM7, Exile SXT65Q, Exile XI12D, Exile Harpoon, Exile SM600.1 , Exile Xi800.4.

  3. #3
    Join Date
    Jun 2008
    Location
    NOR-CAL
    Posts
    177

    Default

    LOL.....Will do!!!!
    I think I will my have boat pulled out of storage tommorrow and check it out...........Tossing around the idea of a New Years day run anyway....lol
    07 LSV usually DUMPED

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •